General Information
Revision date
2024-02-15
Product name
11019-H - ProFast Primer RW - Hardener Hexamethylene diisocyanate, oligomers
CAS No.
28182-81-2
1.2.1 Relevant identified uses
Hardener for primers. For professional users only
1.2.2. Uses advised against
All uses not specified in this section or in section 7.3
Emergency telephone
+31 (0) 85 78 200 20
Icons in SDS
Company Information
company name
Prokol Protective Coatings
e-mail address of the competent person responsible for the Safety Data Sheet
sds@prokol.nl
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H332, H335
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H332
Harmful if inhaled
H335
May cause respiratory irritation
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
GB CLP Regulation: Classification of this product has been carried out in accordance with GB CLP Regulation. Acute Tox. 4: Acute inhalation toxicity, Category 4, H332 Skin Sens. 1: Sensitisation, skin, Category 1, H317 STOT SE 3: Respiratory tract toxicity, single exposure, Category 3, H335
2.2 Label elements
GB CLP Regulation: Warning
Hazard statements
Acute Tox. 4: H332 - Harmful if inhaled. Skin Sens. 1: H317 - May cause an allergic skin reaction. STOT SE 3: H335 - May cause respiratory irritation.
Precautionary statements
P261: Avoid breathing dust/fume/gas/mist/vapours/spray. P271: Use only outdoors or in a well-ventilated area. P280: Wear protective gloves/protective clothing/respiratory protection/eye protection/protective footwear. P302+P352 IF ON SKIN Wash with plenty of soap and water P304+P340 IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing P312: Call a POISON CENTER or doctor/physician if you feel unwell. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P501: Dispose of the contents and/or its container in line with regulations on dangerous waste or packaging and waste packaging respectively.
Additional information
As from 24 August 2023 adequate training is required before industrial or professional use.
2.3 Other hazards
Product does not meet PBT/vPvB criteria