Fast Dry Epoxy Primer SIMPOX PM.1422.RE GREY

Profix Paints Australia Pty Ltd

Revision date : 2025-05-13

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08 GHS02
Health risk rating 4
Safety risk rating 2
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

10-<30%

Listed in

EC/CAS

1675-54-3

Name of the chemical

2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane

Concentration

10-<30%

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

10-<30%

EC/CAS

2530-83-8

Name of the chemical

[3-(2,3-epoxypropoxy)propyl]trimethoxy silane

Concentration

<10%

EC/CAS

1314-13-2

Name of the chemical

Zinc oxide; C.I. 77947

Concentration

<10%

General Information

Version

3 (Replaced 2

Revision date

2025-05-13

Product name

Fast Dry Epoxy Primer SIMPOX PM.1422.RE GREY

1.2.1 Relevant identified uses

(Industrial user) Anticorrosion primer For Industrial user only

1.2.2. Uses advised against

All uses not specified in this section or in section 7.3

Icons in SDS

E011 E012 GHS02 GHS07 GHS08 M009 M010 M013 M017 M032 T013

Company Information

company name

Profix Paints Australia Pty Ltd

e-mail address of the competent person responsible for the Safety Data Sheet

info@multichem.pl, admin@profixpaints.com.au

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H226, H304, H312+H332, H315, H317, H319, H373

Hazard statements

Code

Statements

H226

Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Classification of the hazardous chemical WHS Classification of this product has been carried out in accordance with Model Work Health and Safety Regulations(Hazardous Chemicals) Amendment 2022 Acute Tox. 4: Acute toxicity, Category 4, H312+H332 Asp. Tox. 1: Aspiration hazard, Category 1, H304 Eye Irrit. 2A: Eye irritation, Category 2A, H319 Flam. Liq. 3: Flammable liquids, Category 3, H226 Skin Irrit. 2: Skin irritation, Category 2, H315 Skin Sens. 1: Sensitisation, skin, Category 1, H317 STOT RE 2: Specific target organ toxicity — Repeated exposure, Hazard Category 2 (Oral), H373 2.2 Label elements, including precautionary statements: WHS: Danger

Hazard statements

H226 - Flammable liquid and vapour. H304 - May be fatal if swallowed and enters airways. H312+H332 - Harmful in contact with skin or if inhaled. H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H373 - May cause damage to organs through prolonged or repeated exposure (Oral).

Precautionary statements

SECTION 2: HAZARD(S) IDENTIFICATION (continued) P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260: Do not breathe vapours P280: Wear protective gloves/face protection/protective clothing/respiratory protection/protective footwear. P303+P361+P353 IF ON SKIN (or hair) Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P501: Dispose of contents and / or containers in accordance with regulations on hazardous waste or packaging and packaging waste respectively.

Hazardous Ingredients

Xylene (10 - <30 %); Amides, from C18-unsatd. fatty acid dimers, tall-oil fatty acids and triethylenetetramine, reaction products with bisphenol A epichlorohydrin, polymer (10 - <30 %); Bis-[4-(2,3-epoxipropoxi)phenyl]propane (10 - <30 %); [3-(2,3- epoxypropoxy)propyl]trimethoxysilane (<10 %)

Other hazards which do not result in classification

Not relevant SECTION 3: COMPOSITION AND INFORMATION ON INGREDIENTS, IN ACCORDANCE WITH SCHEDULE 8

2.1 Classification of the substance or mixture

WHS: Classification of this product has been carried out in accordance with Model Work Health and Safety Regulations(Hazardous Chemicals) Amendment 2022 Acute Tox. 4: Acute toxicity, Category 4, H312+H332 Asp. Tox. 1: Aspiration hazard, Category 1, H304 Eye Irrit. 2A: Eye irritation, Category 2A, H319 Flam. Liq. 3: Flammable liquids, Category 3, H226 Skin Irrit. 2: Skin irritation, Category 2, H315 Skin Sens. 1: Sensitisation, skin, Category 1, H317 STOT RE 2: Specific target organ toxicity — Repeated exposure, Hazard Category 2 (Oral), H373

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.