RAPIDGEL EZ1

Hazard statements (CLP)

H335

Code

Statements

H335

May cause respiratory irritation

2.1 Classification of the substance or mixture

OSHA Mixture Classification (GHS-US) STOT SE 3 H335

Hazard statements

see section 16 label Elements GHS-US H335 - May cause respiratory irritation see section 16 4.1. Description of First Aid Measures First-aid Measures General: Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible}. First-aid Measures After Inhalation When symptoms occur go into open air and ventilate suspected area First-aid Measures After Skin Contact: Remove contaminated clothing. Drench affected area with water for at least 15 minutes. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. First-aid Measures After Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. First-aid Measures After Ingestion: Rinse mouth. Do NOT induce vomiting. 4.2. Most Important Symptoms and Effects, Both Acute and Delayed Symptoms/Injuries: Irritation of respiratory tract. Symptoms/Injuries After Inhalation: May cause irritation to the respiratory tract, sneezing, coughing, burning sensation of throat with constricting sensation of the larynx and difficulty in breathing. Symptoms/Injuries After Skin Contact: Contact during a long period may cause slight irritation. Symptoms/Injuries After Eye Contact: May cause slight irritation to eyes. Symptoms/Injuries After Ingestion: Ingestion may cause nausea, vomiting and diarrhea. Chronic Symptoms: None known. 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed If medical advice is needed, have product container or label at hand. 5.1. Extinguishing Media Suitable Extinguishing Media: Use extinguishing media suitable for surrounding type of fire. Carbon dioxide (C02}. dry chemical powder. Sand. Unsuitable Extinguishing Media: Do not use water. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Combustible. Explosion Hazard: Product is not explosive. Reactivity: No reactivity hazard. 5.3. Advice for Firefighters Firefighting Instructions: Exercise caution when fighting any chemical fire. Protection During Firefighting: Do not enter fire area without proper protective equipment, includin 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Avoid contact with the skin and the eyes. 6.1.1. For Non-emergency Personnel Protective Equipment: Use appropriate personal protection equipment (PPE}. Emergency Procedures: Evacuate unnecessary personnel. 6.1.2. For Emergency Responders Protective Equipment: Equip cleanup crew with proper protection. Emergency Procedures: Ventilate area. 6.2. Environmental Precautions Prevent entry to sewers and public waters. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Absorb and/or contain spill with inert material. Methods for Cleaning Up: Collect absorbed material and place into a sealed, labeled container for proper disposal. Clean up spills immediately and dispose of waste safely. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. 7.1. Precautions for Safe Hand ling Additional Hazards When Processed: Keep away from heat, sparks, open flames, hot surfaces. - No smoking. Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking, or smoking and again when leaving work. Do not eat, drink or smoke when using this product. 7.2. Conditions for Safe Storage, Including Any Incompatibilities

Hazard pictograms

GHS07

Signal word

Warning

Precautionary statements

P261 - Avoid breathing mist, spray, vapors. P271 - Use only outdoors or in a well-ventilated area. P304+P340 - If inhaled: Remove person to fresh air and keep at rest in a position comfortable for breathing. P312 - Call a doctor if you feel unwell. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P501- Dispose of contents/container in accordance with local, regional, national, and international regulations.

2.3 Other hazards

No additional information available 2.4.

Ingredient(s) with unknown acute toxicity

No data available1 3.1. Substance Name : RAPIDGEL EZ1 CAS No Name

Classification (GHS-US)

Polyethylene glycol (CAS No) 25322-68-3 75-95 STOT SE 3, H335 Acrylate Polymer Trade secret 5-25 3.2. Mixture Not applicable

Storage

Conditions Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Protect from heat and direct sunlight. Incompatible Products: Strong oxidizers. Temperature > 20 °C (for bulk quantities) Area Temperature higher than necessary degrades quality at rates dependent on time and temperature of exposure Special Rules on Packaging: Stainless steel preferred for storage. 7.3. Specific End Use(s) For substances listed in section 3 that are not listed here, there are no established exposure limits from the manufacturer, supplier importer or the appropriate advisory agency including ACGIH (TLV) NIOSH (REL) or

Appearance/Odor

White Characteristic Odor Threshold No data available pH 9.0 – 11.0 Relative Evaporation Rate (butylacetate=1) No data available Melting Point No data available Freezing Point No data available Boiling Point > 250 °C {482 °F) Flash Point > 245 °C (473 °F) Auto-ignition Temperature No data available Decomposition Temperature No data available Flammability (solid, gas} No data available Vapor Pressure No data available Relative Vapor Density at 20 °C No data available Relative Density No data available Specific Gravity No data available Solubility Water: Soluble Partition Coefficient: N-Octanol/Water Not available Viscosity 3000cps @ 25°C Explosive Properties No data available Oxidizing Properties No data available Explosive Limits Not applicable 9.2.

Further information

No additional information available 10.1 Reactivity: No reactivity hazard. 10.2 Chemical Stability: Stable under normal temperature and pressure. 10.3 Possibility of Hazardous Reactions: Hazardous polymerization will not occur. 10.4 Conditions to Avoid: Direct sunlight. Extremely high or low temperatures. Keep away from heat, sparks, open flames, hot surfaces. - No smoking. 10.5 Incompatible Materials: Strong oxidizers. 10.6 Hazardous Decomposition Products: Carbon oxides (CO, C02). 11.1.