Security Mesh

Hazardous Ingredients

Identity Information Hazardous Component Specific Chemical Identity Common Name(s) OSHA PEL ACGIH TLV None This product is considered an “Artilce” under the guidelines of the Federal OSHA Hazard Comminication Standard, 29CFR, Part 1910 and is not under the jurisdiction of the 29CFR Part 1910 Standard. Section III - Physical / Chemical Characteristics Boiling Point N/A Specific Gravity (H2O =1 N/A Vapor Pressure (mm Hg) N/A Melting Point - Base Metal 2,750ºF Vapor Density (AIR -1) N/A Evaporation Rate Butyl Acetate =1 N/A Solubility in Water: N/A

Appearance/Odor

Various colors - No significant Odor Section IV - Fire and Explosion Hazard Data Flash Point (Method Used) N/A Flammable Limits: LEL - N/A UEL - N/A Extinguishing Media: Water, all purpost ABC Dry Chemical for packaging boxes Product is steel - will melt above 2,750ºF Special Fire Fighting Proceedures: Dried polymer (paint finish) films are capable of burning. Avoid breathing fumes. Unusual Fire and Explosion Hazards: N/A Section V - Reactivity Data Stability Stable X Conditions to Avoid None Unstable Incompatibility (Materials to Avoid) Avoid contact with strong oxidizing agents Hazardous Decomposition or Byproduct Thermal decomposition of paint finsh may yield oxides of carbon, monomar fumes adn oxides of ntrogen Hazardous Polymerization May Occur Conditions to Avoid None Will Not Occur X Section VI - Health Aazard Data

Principle Routes of Exposure

Inhalation X Skin Ingestion

Health hazards

Acute and Chronic) The fumes from any paint burning are to be avoided. Good ventilation should be maintained, otherwise wear NIOSH approved respirator where vapor concentrations are encountered. Carcinogenicity: N/A NTP - N/A ARC Monographs - N/A OSHA Regulated - N/A Signs and Symptoms of Exposure Inhalation Prolonged or repeated exposure to vapors, fumes or smoke when burning may result in irritation to upper respratory tract. Skin: Molten material may cause severe thermal burns

Medical Conditions Generally Aggravated by Exposure

Individulas with chronic respiratory disorders (i.e. asthma, chronic bronchitis, emphysema, etc.) may be adversley affected by any fumes or airborne particulate matter exposure. Emergency and First Aid Procedures Rush to fresh air. If not breathing give artifical respiration; have trained person administer oxygen. Contact Emergency Medical Services Section VII - Precautions For Safe Handling and Use Steps To Be Taken In Case Material is Released Or Spilled: None Waste Disposal Method: Recycle or Landfill in accordance with local and federal regulations.

Precautionary statements

To Be Taken In Handling And Storing No special handling precautions are known to AMICO Other Precautions: None Section VIII - Control Measures Respiratory Protection (Specify Type): None required if good ventilation is maintained. Ventilation: Local Exhaust Special: None known to AMICO Mechanical: (General) Local exhaust at Other: None known to AMICO point of contaminant release Protective Gloves: N/A Eye Protection: Wear protective glasses while installing the product. Other Protective Clothing Or Equipment: N/A