EVERLUBE

Hazardous Ingredients

OSHA COMPONENT/EXPOSURE LIMITS CAS# % BY WT METHYL ETHYL KETONE 78-93-3 25% 30% OSHA PEL 200.000 PPM — TWA OSHA VPEL 200.000 PPM — TWA OSHA VPEL 300.000 PPM —- STEL ACGIH TLV 200.000 PPM —- TWA ACGIH TLV 300.000 PPM — STEL LD50-930 mg/m3 ORAL (rat) LD50 100 mg/kg ORAL (mouse) LD50 200 ul/kg DERMAL (rabbit) ETHANOL 64-17-5 20% 25% OSHA PEL 1000.000 ppm —- TWA OSHA VPEL 1000.000 ppm - TWA ACGIH TLV 1000.000 ppm - TWA LD50 ORAL-7060 mg/kg (rat) LC 50 INHALATION-20000 ppm 10 hr (rat) MOLYBDENUM DISULFIDE 1317-33-5 5% -— 10% ACGIH TWA I 10 mg/m3 ACGIH TWA R 3 mg/m3 LD50/LC50: 500 mg Acute Oral (rats) ANTIMONY TRIOXIDE 1309-64-4 5% -— 10% ACGIH PEL-TWA: 0.5 mg/m3 as Sb ACGIH TLV TWA: 0.5 mg/m3 as Sb LD50/LC50: >2,000 mg/kg Acute Dermal (rabbit) >34,600 mg/kg Acut Oral (rat) 3,250 mg/kg Acut Intraperitoneal (rat) 172 mg/kg Acute Intraperitoneal (mouse) ISOPROPANOL 67-63-0 0S -— 5% OSHA PEL: 400.000 PPM-TWA OSHA VPEL: 400.000 PPM-TWA OSHA VPEL 500.000 PPM-STEL ACGIH TLV 200.000 PPM-TWA ACGIH TLV 400.000 PPM-TWA LD50 ORAL RAT: 5700-5800 MG/KG LC50 INHALATION RAT: 16000 PPM, 4HR LD50 DERMAL RABBIT: 5030-7900 MG/KG METHYL ALCOHOL 67-56-1 0S -— 5% OSHA PEL 200.000 ppm-TWA EVERLUBE 624 OSHA VPEL 200.000 ppm-TWA (Skin) OSHA VPEL 500.000 ppm-STEL (Skin) ACGIH TLV 200.000 ppm-TWA (Skin) ACHIH TLV 250.000 ppm-STEL (Skin) LD50 ORAL 1000.0 mg/kg (man LC50 VAPORS 1600 ppm (rats) PHENOL 108-95-2 0S -— 5% ACGIH TLV-TWA 5 ppm (Skin) OSHA PEL-TWA 5 ppm (skin) LD50 ORAL 410-650 mg/kg (rat) LC50 INHALATION: 900 mg/m3 (rat) BETHYL BENZENE 100-41-4 0S -— 5% OSHA PEL 100 ppm-TWA OSHA VPEL 100 ppm-TWA OSHA VPEL 125 ppm-STEL ACGIH TLV 100 ppm-TWA ACGIH TLV 125 ppm-STEL LD50 ORAL: 3500 mg/kg (rat)

SECTION 2: Hazards identification

IDENTIFICATION POTENTIAL EFFECTS OF SHORT-TERM (ACUTE) EXPOSURE: Processing fumes may cause irritation of the eyes and respiratory tract. Use with adequate ventilation. Avoid breathing process fumes. EYE CONTACT: This material can cause eye irritation. SKIN CONTACT: Prolonged and repeated contact with the skin can cause defatting and drying of the skin resulting in skin irritation and skin rash (dermatitis). INHALATION: Inhalation of high concentrations of solvents may cause narcotic effects such as headaches, dizziness, nausea, vomiting and coma. INGESTION: May cause adverse

Potential health effects

and can cause gastro-intestinal irritation. POTENTIAL EFFECTS OF LONG-TERM (CHRONIC) EXPOSURE: No specific information is available regarding long-term exposure to this material. of the material or its ingredients can be found in Section 11

Further information

on any known toxic or chronic-—

TOXICOLOGICAL INFORMATION

FIRST AID MEASURES EYE CONTACT: With eyelids open, immediately flush eyes with lots of lukewarm water for at least 30 minutes. Get immediate Medical Assistance. SKIN CONTACT: Wash the skin thoroughly with plenty of water for at least 15 minutes, using a mild and non-abrasive soap. Cold water may be used Consult a doctor if irritation persists. EVERLUBE 624 INHALATION: Evacuate to fresh air and administer artificial respiration if breathing stopped. Obtain Medical Aid. INGESTION: Never give anything by mouth if the victim is semi-conscious, unconscious or convulsing. Seek immediate medical attention. Induce vomiting immediately by giving 2 glasses of water and stimulating the uvula with a finger. NOTE TO PHYSICIANS: The main hazard following accidental ingestion iS aspiration of the liguid into the lungs producing chemical pneumonitis. If more then 2.0 ml/Kg has been ingested, vomiting should be induced with supervision. If symptons, such as loss of gag reflex, convulsions or unconsciousness occur before vomiting, gastric lavage with a cuffed endotracheal tube should be considered. FIRE FIGHTING MEASURES FLAMMABLE PROPERTIES: Vapors may form, with air, an explosive mixture between lower and upper explosive limits. FLASH POINT (DEGREES F.) ..............: 23 F FLASH POINT METHOD ...................-.: TCC LOWER FLAMMABILITY LIMIT (% BY VOLUME).: 2.0 UPPER FLAMMABILITY LIMIT (% BY VOLUME).: 36.0 AUTO-IGNITION TEMPERATURE..............: n/a HAZARDOUS DECOMPOSITON PRODUCTS: Irritating and/or toxic fumes including the following may be released: Carbon, Sulfur, Antimony, or their compounds UNUSUAL FIRE AND EXPLOSION HAZARDS: Avoid accumulation of water. Product will float on water and may reignite on surface of water. Closed containers may explode due to pressure build-up when exposed to extreme heat. DO NOT cut, drill, grind or weld near containers even when empty. Residual product or vapours may ignite or explode. Extinguish all nearby sources of ignition. EXTINGUISHING MEDIA: CO2, foam, dry chemical or halon FIREFIGHTING PROCEDURES / EQUIPMENT: Extinguish all nearby sources of ignition. EVERLUBE 624 Use water spray to cool containers and structures exposed to fire. Fire-Fighters should wear self-contained breathing apparatus and full protective equipment. ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS : Emergency personnel must wear the following protective equipement: selfcontained breathing apparatus, protective clothing, safety goggles and boots. Evacuate all personnel not related to emergency procedures. ENVIRONMENTAL PRECAUTIONS : Prevent the product or the wash waters from entering the water system or sewers. US regulations require reporting spills of this material that could reach any surface waters. In Canada, report to the applicable provincial environment ministry. SPILL RESPONSE / CLEANUP: SMALL SPILL: Kliminate all sources of ignition, provide ventilation, contain spill and absorb with inert absorbent. Issue warning "Flammable". Isolate the hazard area and restrict access. Handle as highly flammable liquid. Wear appropriate breathing apparatus (if applicable) and protective clothing. Prevent the spill or wash from entering sewers or watercourses. LARGE SPILL: Remove by mechanical means and place in containers. HANDLING AND STORAGE SAFE HANDLING PROCEDURES : Maintain good personal hygiene. Avoid breathing processing vapours. Avoid prolonged or repeated