General Information
Product name
INTURF ESTABLISH 15-5-15 POST INSTALLATION
Substance name
Inform the appropriate water authority in the event of accidental watercourse contamination. Methods for and cleaning up READ BEFORE USE
1.2.1 Relevant identified uses
Granular Organic Fertilizer for Sports/ spillage is segregated from normal product and disposed of in conformity Amenity areas post installation of turf with section 14. Buildings used for storage should be dry and well ventilated; stacks therein should be at least 1 metre from walls, eaves and
Emergency telephone
+44 (0) 7730 780885 or +44 (0) 7730
Icons in SDS
Company Information
company name
sources of heat, fire or explosion. Keep away from combustible materials
Section 2
SECTION 2: Hazards identification
1999/45/EC beams. Packaging materials Polethylene (PE), Polypropylene (PP) and Human Health Product is of a low toxicity but prolonged skin or eye PTFE contact may cause some irritation.This fertilizer preparation is not classified as a dangerous material according to EC directive 67/548/EEV 8. Workplace Exposure Limits (WEL) EH40/2005 Workplace Exposure or 1999/45/EC. Ingestion: Small quantities are unlikely to cause toxic Limits (published be HSE) specify for dust: TWA 10mg/m3 (inhalable), effects. Large quantities may give rise to gastro-intestinal disorders. TWA 4mg/m3 (respirable) Precautionary and engineering measures Inhalation: Low toxicity dust but high concentration of air-borne Avoid high dust concentration and provide ventilation where necessary. material may cause irritation of the nose and upper respiratory tract with Personal protection Wear suitable gloves when handling product over symptoms such as sore throat and coughing. Generally regarded as a long periods. Use suitable dust respirator if dust concentration is high. nuisance dust with no specific official Occupational Exposure Limit (OEL). After handling product, wash hands and observe good hygiene practice. Recommended atotal inhalable dust standard for nuisance dust of 10mg/ m3 as an 8 hour Time Weighted Average. See HSE Guidance Notes 9. PHYSICAL AND CHEMICAL PROPERTIES EH40/0005 and HSG 173. Appearance: White grey or brown granules unless deliberately coloured Molten Material: Will cause burns Fire and thermal decomposition during manufacture. Odour Odourless. pH water solution Usually > products: May emit toxic fumes of Ammonia and oxides of sulphur under 4.5 – 6.0 Bulk Density: Normally between 900-1100 kg/m3 intense heat. Solubility in water: Soluble in water, extent depends on composition. Most formulations are hygroscopic.
