FO20029887

SECTION 2: Hazards identification

OSHA identification mixture This has not ben evaluated as a whole. Information provided on the health effects this of product is based individual on components. All ingredients are bound and potential for hazardous exposure as shipped is minimal. However, some vapors may b e released upon heating and the end -user (fabricator) must take the necessary

Precautionary statements

mechanical ventilation, respiratory protection, etc.) to protect employes from exposure.After handling, always wash hands thoroughly with soap and water.

2.2 Label elements

None known.

2.3 Other hazards

None known. Section 3. Com position/inform ation on ingredients Substance/m ixture : M ixture Chem ical nam e : M ixture eans Other m of identification FO20029887 CAS num ber/other identifiers Ingredient nam e % CAS num ber 1,2 -Benzenedicarboxylic acid, di -C8 -10 -branched alkyl esters, 30 - 60 68515 -48 -0 C9 -rich M iscelaneous Irritant 1 - 5 Not available. concentration Any shown as a range is to protect confidentiality or is due to batch variation. There are no aditional ingredients present which, within the curent knowledge of the supplier and in the concentrations aplicable, are classified as hazardous to health or the environm ent and hence require reporting in this section. Ocupational expos ure lim its, if available, are listed in Section 4. First aid m easures Description of necessary first aid easures m Eye contact Immediately flush eyes with plenty of water, ocasionaly l ifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. If irritation persists, get medical atention. Inhalation Remove victim to fresh air and kep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest ocurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the pers on providing aid to give mouth -to -mouth resuscitation. Get medical atention if adverse

Potential health effects

persist or are severe. If unconscious, place in recovery position and get medical atention immediately. M aintain an open airway. Loosen tight clothing s uch as a colar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may ned to be kept under medical surveilance for 48 hours. Skin contact Flush contaminated skin with ple nty of water. Remove contaminated clothing and shoes. Get medical atention if symptoms ocur. W ash clothing before reuse. Clean shoes thoroughly before reuse. Ingestion : W ash out mouth with water. Remove dentures if any. Remove victim to fresh air an d kep at rest in a position comfortable for breathing. If material has ben swalowed and the exposed person conscious, is give smal quantities of water to drink. Stop if the exposed person fels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting ocurs, the head should be kept low so that vomit does not enter the lungs. Get medical atention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious per son. If unconscious, place in recovery position and get medical atention immediately. M aintain an open airway. Loosen tight clothing such as a colar, tie, belt or waistband. M ost im portant sym ptom s/effects, acute and delayed Potential acute health effects Eye contact Causes eye irritation. Inhalation Exposure to decomposition products may cause a health hazard. Serious effects may be delayed folowing exposure. Skin contact No known significant effects or critical hazards. Ingestion : M ay be irritating to mouth, throat and stomach. Over -exposure signs/sym ptom s Eye contact Adverse symptoms may include the folowing: irritation watering rednes Inhalation No specific data. Skin contact No specific data. Ingestion No specific data. Indication of im ediate m edical attention and special treatm ent neded, if necessary Notes to physician In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may ned to be kept under medical surveillance for 48 hours. Specific treatm ents No specific treatment. Protection of first -aiders No actio n shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth -to -mouth resuscitation. Se toxicological inform ation (Section 11) Section 5. Fire -fighting m Extinguishing m edia Suitable extinguishing m edia In case of fire, use water spray (fog), foam, dry chemical or CO �. Unsuitable extinguishing m edia None known. Specific hazards arising from the chem ical In a fire or if heated, a presure increase wil ocur and the container may burst. Hazardous therm al decom position products Decomposition products may include the folowing materials carbon dioxide carbon monoxide nitrogen oxides Special protective actions for fire - fighters Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shal be taken involving any personal risk or without suitable training. Special protective e quipm ent for fire -fighters Fire -fighters should wear appropriate protective equipment and self - contained breathing apparatus (SCBA) with a full face -piece operated in positive presure mode. Section 6. Acidental release m easures Personal precautions, protective equipm ent and em ergency procedures For non -em ergency personnel No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Kep unnecessary and unprotected personnel from entering. Do not touch or walk through spiled material. Avoid breathing vapor mist. or Provide a dequate ventilation. W ear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment. ergency For em responders If specialised clothing is required to with the spilage, deal take note of any information in Section 8 on suitable and unsuitable materials. Se also the information in "For non -emergency personnel". Environm ental precautions Avoid dispersal of spil led material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental polution (sewers, waterways, soil or air). M ethods and m aterials for containm ent and cleaning up al Sm l spill Stop leak if without risk. M ove containers from spill area. Dilute with water and mop up if water -soluble. Alternatively, or if water - insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose via of a licens ed waste disposal contractor. Large spill Stop leak if without risk. M ove containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. W ash spilages into effluent an treatment plant or proceed as folows. Contain and colect spilage with non - combustible, absorbent material e.g. sand, vermiculite earth, or diatomaceous earth and place in container for disposal according to local regulations (se Section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spiled product. Note: se Section 1 for emergency contact information and Section 13 waste disposal. for Section 7. Handling and storage Precautions for safe ha ndling Protective m easures Put on appropriate personal protective equipment (se Section 8). Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist. Kep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product re sidue and can be hazardous. Do not reuse container. Advice on general ocupational hygiene Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. W orkers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. Se also Section 8 for additional information on hygiene measures. Conditions for safe storage, including any incom patibilities Store in accordan ce with local regulations. Store in original container protected from direct sunlight in a dry, cool and wel -ventilated area, away from incompatible materials (se Section 10) and food and drink. Kep container tightly closed and sealed until ready for us e. Containers that have ben opened must be carefuly resealed and kept upright to prevent leakage. Do not store unlabeled in containers. Use appropriate containment to avoid environmental contamination. Section 8. Exposure controls/personal protection Control param eters Ocupational exposure lim its None. Apropriate enginering controls Good general ventilation should sufficient be to control worker exposure to airborne contaminants. Environm ental exposure controls Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or enginering modifications to the process equipment wil be necessary to reduce emissions to acceptable levels. protection m Hygiene m easures W ash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the workin g period. Appropriate techniques should be used to remove potentialy contaminated clothing. W contaminated ash clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. Eye/face protection Safety ey ewear complying with an approved standard should be used when a risk assessment indicates this is necesary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the folowing protection should be worn, unless the asessment indicates a higher degre of protection: chemical splash goggles. Skin protection Hand protection Chemical -resistant, impervious gloves complyin g with an approved standard should be worn at al times when handling chemical products if a risk asessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are stil retaining t heir protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be a curately estimated. Body protection Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Other skin protection Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Respiratory protection Use a properly fitt ed, air -purifying or air -fed respirator complying with an approved standard if a risk assesment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the working safe limits of the selected respirator. Section 9. Physical and chem ical properties Apearance Physical state liquid [Paste.] Color W HITE Odor Not available. Odor threshold Not available. pH Not available. M elting point Not available. Boiling point Not available.