Note: Ingredients listed on restricted chemical lists
EC/CAS
1303-86-2
Name of the chemical
Dibortrioxid (790/2009)
Concentration
N/A
EC/CAS
7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
General Information
Revision date
2015-05-01
Product name
All iMPaAGRE
Product Synonyms
Carbide Cutting Tools
1.2.2. Uses advised against
No additional information available
Icons in SDS
Company Information
company name
m\mn\in\-SRaAGRY
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H317, H330, H334, H351, H361, H372, H400, H410, H412
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
Classification (GHS-US)
Within the meaning of the OSHA Hazard Communication Standard [29 CFR 1910.1200]: this product is considered a manufactured article and is not considered a hazard when used in a manner which is consistent with the labeled directions. Tungsten carbide (CAS No) 12070-12-1 10 - 94 Not classified Titanium carbide (TiC) (CAS No) 12070-08-5 0.2 - 53 Not classified Cobalt (CAS No) 7440-48-4 0-20 Acute Tox. 4 (Oral), H302 Acute Tox. 1 (Inhalation:dust,mist), H330 Resp. Sens. 1B, H334 Skin Sens. 1, H317 Carc. 2, H351 Repr. 2, H361 Aquatic Acute 1, H400 Aquatic Chronic 1, H410 Nickel (CAS No) 7440-02-0 0 - 15 Skin Sens. 1, H317 Carc. 2, H351 STOT RE 1, H372 Aquatic Chronic 3, H412 Tantalum carbide (TaC) (CAS No) 12070-06-3 0 - 15 Not classified Niobium carbide (Nb2C) (CAS No) 12011-99-3 0 - 5 Not classified Chromium (CAS No) 7440-47-3 0 - 3 Comb. Dust, H232 Chromium carbide (Cr3C2) (CAS No) 12012-35-0 0 - 3 Not classified Aluminum oxide (CAS No) 1344-28-1 0 - 2 Not classified Boron oxide (B2O3) (CAS No) 1303-86-2 0 - 2 Repr. 1B, H360 Zirconium (CAS No) 7440-67-7 0 - 2 Pyr. Sol. 1, H250 Self-heat. 1, H251 Water-react. 1, H260 Molybdenum (CAS No) 7439-98-7 0 - 2 Comb. Dust, H232 Full text of H-phrases: see section 16
2.2 Label elements
GHS-US Labeling No labeling applicable
2.3 Other hazards
During normal operation and usage, cemented carbide products do not present inhalation, ingestion, or other chemical hazards. However, operations such as grinding, cutting, burning, and welding of such products may release dusts, fumes, or vapors which may present health hazards. The health hazards described below relate to these non-routine operations, as well as exposure to component materials. Wet or dry grinding of cemented carbide products will produce dusts of potentially hazardous ingredients which can be inhaled, swallowed, or come in contact with the skin or eyes. During wet griding, the dust can be suspended or dissolved in the coolant mist. 2.4.
Ingredient(s) with unknown acute toxicity
No data available 3.1. Substance Not applicable 3.2. Mixture Name
