ProVinyl High Gloss Acrylic Enamel Coating

2.1 Classification of the substance or mixture

This product is considered hazardous by The 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Acute Toxicity-Inhalation (Vapors) Category 4 Acute Toxicity-Inhalation (Dust-mists) Category 4

2.2 Label elements

Statements Serious eye damage/eye irritation – Category 2

Hazard statements

Skin sensitization – Category 1 May be harmful if swallowed Can cause mild skin irritation Can cause eye irritation on contact May cause respiratory irritation

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protection (eye protection, gloves) during application. When grinding/sanding dry films, wear respiratory protection.

Response

If on skin, wash with plenty of soap and water. If in eyes, rinse cautiously for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If inhaled, remove victim to fresh air. If exposed or concerned, get medical advice.

Storage

Keep closures tight and containers upright to prevent leakage. KEEP FROM FREEZING Product is non-combustible.

Disposal

The coating and any contaminated diking material should be thoroughly air dried and collected into drums. The drums should be sealed, labeled and land-filled or incinerated according to local, regional and national regulations.

2.3 Other hazards

Not applicable

Further information

Repeated or prolonged skin contact may cause allergic reactions with susceptible persons.