Note: Ingredients listed on restricted chemical lists
EC/CAS
811-97-2
Name of the chemical
1,1,1,2-Tetrafluoroethane
Concentration
N/A
General Information
Revision date
2011-07-03
Product name
EC FORMAT (EC)
CAS No.
811-97-2
1.2.1 Relevant identified uses
For best results, perforate chewing gum with fork or perforator block before application of freezer spray Remove nozzle from can before inserting tube. Re-attach nozzle to can and spray onto gum or staining matter for approximately 5 seconds When white frost appears, chip hardened gum or matter away from fibres or surface with a blunt knife, then brush or vacuum away. Avoid damaging fibres or surface being treated
Emergency telephone
020 8974 1515 (UK) +44 20 8974 1515 (office hours 8am to 5pm, Monday to Friday only
Icons in SDS
Company Information
company name
Prochem Europe Ltd.
e-mail address of the competent person responsible for the Safety Data Sheet
sales@prochem.co.uk
Section 2
Classification (DPD)
Not classified as hazardous
Most important adverse effects
Eye Contact: Contact with liquid or vapour may cause moderate eye irritation and possible cold burns. Skin Contact: May cause cold burns (frost bite). No irritation or skin sensitisation. Inhalation: Exposure to high concentrations of vapour may cause headache, dizziness and nausea. Ingestion: Liquid splashes may cause cold burns to the mouth and throat.
Environmental hazards
See Ecological Information for further details
2.2 Label elements
For professional and industrial use only. Keep out of the reach of children. Keep container in a well ventilated place. Do not breathe vapour/spray. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. This material and its container must be disposed of in a safe way. Use only in a well ventilated area.
2.3 Other hazards
Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 50°C / 112°F. Keep away from sources of ignition – No Smoking. Do not pierce or burn even after use. Do not spray on an open flame or other ignition source. Do not invert or shake the can during use. Spray in short bursts to prevent cooling of the can. See section 8 for details of exposure limits.
