General Information
Revision date
2014-09-30
Product name
GR-1
CAS No.
41637-38-1
1.2.1 Relevant identified uses
Methacrylate based resin for stereolithography systems with solid state laser (Nd:YVO4) for the production of ITE-shells / earmoulds
Manufacturer Name
pro3dure GmbH
Emergency telephone
Giftnotruf Universität Mainz,
Icons in SDS
Company Information
company name
pro3dure GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
info@pro3dure.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
2.1 Classification of the substance or mixture
Regulation (EC) No 1272/2008: Skin Irrit. 2; H315 , Eye Irrit. 2; H319 , Skin Sens. 1; H317 , STOT SE 3; H335 Directive 67/548/EEC: Xi; R36 , Xi; R38 , Xi; R37 , -; R43
Hazard pictograms
GHS07 Xi Irritant. 1 1
Signal word
Warning
Hazard statements
315 Causes skin irritation. 317 May cause an allergic skin reaction. 319 Causes serious eye irritation. 335 May cause respiratory irritation.
Precautionary statements
264.1 Wash hands thoroughly after handling. 280 Wear protective gloves/protective clothing/eye protection/face protection. 302+352 IF ON SKIN: Wash with plenty of water/.?. 321 Specific treatment (see .? on this label). 332+313 If skin irritation occurs: Get medical advice/attention. 362+364 Take off contaminated clothing and wash it before reuse.
EU Classification
Directive 67/548/EEC or 1999/45/EC NFPA Hazard Identification System
R-phrase(s)
36 Irritating to eyes. 37 Irritating to respiratory system. 38 Irritating to skin. 43 May cause sensitization by skin contact.
S-phrase(s)
20/21 When using do not eat, drink or smoke. 28.2 After contact with skin, wash immediately with plenty of water and soap.
Health hazards
Material that on exposure would cause irritation but only minor residual injury. Flammability: Material must be pre-heated before ignition can occur. Reactivity: Material that in itself is normally stable, but which can become unstable at elevated temperatures and pressures. Special precautions: Irritation or minor reversible injury possible. Flammability: Materials that must be preheated before ignition will occur. Includes liquids, solids and semi solids having a flash point above 200 °F. (Class IIIB).
Classification according to GHS
Hazardous Materials Identification System) GR-1
Physical hazards
Materials that are normally stable but can become unstable (self-react) at high temperatures and pressures. Materials may react non-violently with water or undergo hazardous polymerization in the absence of inhibitors. Personal protective equipment: Safety glasses Gloves
