Premfire B1 - Polyurethane Foam

Premier Sealant Systems Ltd.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07 GHS08
Health risk rating 5
Safety risk rating 4
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

40%

EC/CAS

75-28-5

Name of the chemical

iso-Butan, enthält  0,1% Butadien

Concentration

8%

General Information

Product name

Premfire B1 - Polyurethane Foam

1.2.1 Relevant identified uses

Foam is used for installation of doors and windows, insulation and fixation of tubes, filling of holes

supplier name

Premier Sealant Systems Ltd.

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

Premier Sealant Systems Ltd.

e-mail address of the competent person responsible for the Safety Data Sheet

sales@premseal.co.uk |

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H222, H229, H315, H317, H319, H334, H335, H351, H373

Hazard statements

Code

Statements

H222

Extremely flammable aerosol

Section 2

2.1 Classification of the substance or mixture

CLP Regulation (EC) No 1272/2008 Classification of this product has been carried out in accordance with CLP Regulation (EC) No 1272/2008 Aerosol 1 Pressurised container: May burst if heated, H229 Aerosol 1 Flammable Aerosols, Category 2, H222 Carc. 2 Carcinogenicity, Category 2, H351 Eye Irrit. 2 Eye Irritation, Category 2, H319 Resp. Sens. 1 Sensitisation, Respiratory, Category 1, H334 Skin Irrit. 2 Skin Irritation, Category 2, H315 Skin Sens. 1 Sensitisation, Skin, Category 1, H317 STOT RE 2 Specific target organ toxicity, repeated exposure, Category 2, H373 STOT SE 3 Respiratory tract toxicity, single exposure, Category 3, H335

2.2 Label elements

CLP Regulation (EC) No 1272/2008 Danger

Hazard statements

H222 Extremely flammable aerosol H229 Pressurised container: May burst if heated H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled H335 May cause respiratory irritation H351 Suspected of causing cancer H373 May cause damage to organs through prolonged or repeated exposure

Precautionary statements

P101 If medical advice is needed, have product container or label at hand P102 Keep out of reach of children Keep away from heat, hot surfaces, sparks, open flames and other ignition P210 sources. No smoking P211 DO NOT spray on an open flame or other ignition source P251 DO NOT pierce or burn, even after use P271 Use only outdoors or in a well-ventilated area P280 Wear protective gloves/protective clothing/eye protection/face protection IF INHALED: Remove victim to fresh air and keep at rest in a position P304 + P340 comfortable for breathing IF IN EYES: Rinse cautiously with water for several minutes. Remove contact P305 + P351 + P338 lenses, if present and easy to do, Continue rinsing P410 + P412 Protect from sunlight. DO NOT expose to temperatures exceeding 50 oC /122 oF Dispose of the contents/containers in accordance with the current legislation P501 on waste treatment

Supplemental label elements

EUH204: Contains isocyanates. May produce an allergic reaction

Hazardous Ingredients

4,4’ – methylenediphenyl diisocyanate, isomers and homologues

Additional information

Annex XVII, REACH) Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.

2.3 Other hazards

Product fails to meet PBT/vPvB criteria

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.