Note: Ingredients listed on restricted chemical lists
EC/CAS
111-76-2
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
3-6
General Information
Revision date
2025-03-01
Product name
Aluminium Brightener
1.2.1 Relevant identified uses
Aluminium cleaner
Icons in SDS
Company Information
company name
Premier One Products Pty Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sales@premieroneproducts.com.au
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H290, H302, H312, H314, H402
Hazard statements
Code
Statements
H290
May be corrosive to metals
Section 2
SECTION 2: Hazards identification
Hazard statements
This product is classified as: Xn, Harmful. N, Dangerous to the environment. C, Corrosive. Hazardous according to the criteria of SWA. Dangerous according to Australian Dangerous Goods (ADG) Code, IATA and IMDG/IMSBC criteria. H290: May be corrosive to metals. H302: Harmful if swallowed. H312: Harmful in contact with skin. H314: Causes severe skin burns and eye damage. H402: Harmful to aquatic life due to extreme pH.
SUSMP Classification
S7
ADG classification
Class 8 Corrosive Substances
UN Number
1760, CORROSIVE LIQUID, N.O.S. (Phosphoric acid, Ammonium bifluoride)
Signal word
DANGER Corrosive to metals Category 1 Acute Toxicity Oral Category 4 Acute Toxicity Dermal Category 4 Skin Corrosion /Irritation Category 1 Hazardous to aquatic environment Short term/Acute Category 3
Prevention
P102: Keep out of reach of children. P234: Keep only in original container. P260: Do not breathe fumes, mists, vapours or spray. P262: Do not get in eyes, on skin, or on clothing. P264: Wash contacted areas thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P271: Use only outdoors or in a well ventilated area. P273: Avoid release to the environment. P280: Wear protective gloves, protective clothing and eye or face protection.
Response
P310: Immediately call a POISON CENTRE or doctor/physician. P321: Specific treatment (see Section 4 of this SDS). P363: Wash contaminated clothing before reuse. P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting P302+P352 IF ON SKIN Wash with plenty of soap and water then apply calcium gluconate gel P304+P340 IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P390: Absorb spillage to prevent material damage. P370+P378: Not combustible. Use extinguishing media suited to burning materials. Water fog or fine spray is the preferred medium for large fires.
Storage
P405: Store locked up. P406: Store in corrosive resistant container with a resistant inner liner. P402+P404: Store in a dry place. Store in a closed container.
Disposal
P501: If they can not be recycled, dispose of contents to an approved waste disposal plant and containers to landfill (see Section 13 of this SDS). Emergency Overview Physical Description & Colour: White milky liquid. Odour: No odour.
Health hazards
causes burns, harmful by inhalation, in contact with skin, and if swallowed. Note in this context, Hydrofluoric acid includes ammonium bifluoride. Hydrofluoric acid burns are a unique clinical entity. Dilute solutions deeply penetrate before dissociating, thus causing delayed injury and symptoms. Burns to the fingers and nail beds may leave the overlying nails intact. The vast majority of cases involve only small areas of exposure, usually on the digits. Solutions of less than 7% may take several hours before onset of symptoms, resulting in delayed presentation, deeper penetration of the undissociated HF acid, and a more severe burn. SWA has a publication available, and it can be found at http://www.safeworkaustralia.gov.au/sites/swa/about/publications/pages/gm1989hydrogenfluoride