Tile Mortar Pro MultiPurose Mortar - Grey Quick Set Mortar - Grey Brick Set Grey Brick Set Cameron Wall Tite Sanded Grey Wall Tite Sanded White Flexible Thin Set Mortar Grey Finish Stucco Coarse Grey Natural Finish Stucco Fine Grey Natural Quickset Vinyl Concrete Patch Fast Patch Grey Fast-Setting Concrete Mix Foundation Plaster 1-Kote Premix Stucco Gray Surface Bonding Cement White Surface Bonding Cement Foam Gard Gray Foam Gard White Pro Mix Masonry Type N Pro Mix Masonry Type S Rapid Set Concrete Mix ...

SECTION 2: Hazards identification

Classification (GHS-US)

Skin corrosion 1A Serious Eye Damage 1 Skin Sensitization 1 Carcinogenicity 1A Specific Target Organ Toxicity After Single Exposure 3 Specific Target Organ Toxicity After Repeated Exposure 1

2.2 Label elements

GHS-US labelling

Hazard pictograms

GHS05 GHS07 GHS08

Signal word

Danger

Hazard statements

Causes severe skin burns and eye damage. May cause an allergic skin reaction. May cause cancer. May cause respiratory irritation. Causes damage to lungs through prolonged or repeated exposure.

Prevention

GHS-US) Keep out of reach of children. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Wear protective gloves and clothing as well as eye and face protection. Remove contaminated work clothing. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use only outdoors or in a well-ventilated area. Do not breathe dust.

Response

GHS-US) If exposed or concerned Get medical advice/attention. If swallowed Rinse mouth. Do NOT induce vomiting. Immediately call a poison center/doctor. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.Wash contaminated clothing before reuse. If concerned, call a poison center/doctor. If inhaled: Remove person to fresh air 01/22/2015 EN (English) Page 1 and keep comfortable for breathing. If concerned, call a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor.

Storage

GHS-US) Store to prevent dust generation. Store to keep dry until use.

Disposal

GHS-US) Dispose of contents and container in accordance with all local, state and federal regulations.

Additional information

Read and Follow all precautions listed in the Safety Data Sheet available on request or at Ashgrovepkg.com. Additional information on the selection and use of respirators can be found in the NIOSH Respirator Selection Logic (DHHS [NIOSH] Publication No. 2005-100) and the NIOSH Guide to Industrial Respiratory Protection (DHHS [NIOSH] Publication No. 87-116) available at http://www.cdc.gov/niosh/docs/87-116/. This product contains greater than 0.1% crystalline silica. Crystalline silica has been linked to cancer, silicosis, and other lung problems in conditions of prolonged airborne over-exposure. Keep product dry until use. Avoid contact with bleed water from wet product. Clothing saturated with wet product can result in delayed, serious alkali skin burns.

2.3 Other hazards

No additional information available. 2.4.

Ingredient(s) with unknown acute toxicity

Quick Set Mortar - Grey: 55 % of the mixture consists of ingredient(s) of unknown acute toxicity. Wall Tite Sanded Grey: 51% of the mixture consists of ingredient(s) of unknown acute toxicity. Wall Tite Sanded White: 49% of the mixture consists of ingredient(s) of unknown acute toxicity. Rapid Set Cement All: 47% of the mixture consists of ingredient(s) of unknown acute toxicity. Fast Patch Grey; Quickset: 44% of the mixture consists of ingredient(s) of unknown acute toxicity. Vinyl Concrete Patch: 42% of the mixture consists of ingredient(s) of unknown acute toxicity. White Surface Bonding Cement; Gray Surface Bonding Cement: 38% of the mixture consists of ingredient(s) of unknown acute toxicity. Pro MultiPurose Mortar -Grey: 36% of the mixture consists of ingredient(s) of unknown acute toxicity. Flexible Thin Set Mortar Grey; Rapid Set Mortar Mix: 33% of the mixture consists of ingredient(s) of unknown acute toxicity. Rapid Set Concrete Mix: 30% of the mixture consists of ingredient(s) of unknown acute toxicity. Pro Mix Masonry Type N; Pro Mix Masonry Type S: 22% of the mixture consists of ingredient(s) of unknown acute toxicity. Finish Stucco Coarse Grey Natural; 1-Kote Premix Stucco: 20% of the mixture consists of ingredient(s) of unknown acute toxicity. Finish Stucco Fine Grey Natural: 19% of the mixture consists of ingredient(s) of unknown acute toxicity. Foam Gard White: 17% of the mixture consists of ingredient(s) of unknown acute toxicity. Foam Gard Gray: 18% of the mixture consists of ingredient(s) of unknown acute toxicity. Brick Set Cameron: 16% of the mixture consists of ingredient(s) of unknown acute toxicity. Foundation Plaster: 13% of the mixture consists of ingredient(s) of unknown acute toxicity. Brick Set Grey: 9% of the mixture consists of ingredient(s) of unknown acute toxicity. Tile Mortar: 6% of the mixture consists of ingredient(s) of unknown acute toxicity. Fast-Setting Concrete Mix: 5% of the mixture consists of ingredient(s) of unknown acute toxicity.