Nitric Oxide

Hazard statements (CLP)

H270, H280, H314, H330, H371

Code

Statements

H270

May cause or intensify fire; oxidiser

Classification (GHS-US)

Ox. Gas 1 H270 Compressed gas H280 Acute Tox. 1 (Inhalation:gas) H330

2.2 Label elements

GHS-US labeling

Hazard pictograms

GHS03 GHS04 GHS06

Signal word

Danger

Hazard statements

H270 - MAY CAUSE OR INTENSIFY FIRE; OXIDIZER H280 - CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED H314 - Causes severe skin burns and eye damage H330 - Fatal if inhaled H371 - May cause damage to organs (LUNG) (Inhalation) CGA-HG11 - SYMPTOMS MAY BE DELAYED

Precautionary statements

P202 - Do not handle until all safety precautions have been read and understood P220 - Keep/Store away from clothing, combustible materials P244 - Keep reduction valves/valves and fittings free from oil and grease P260 - Do not breathe gas P262 - Do not get in eyes, on skin, or on clothing. P271+P403 - Use and store only outdoors or in a well-ventilated place. P280+P284 - Wear protective gloves, protective clothing, eye protection, respiratory protection, and/or face protection. P370+P376 - In case of fire: Stop leak if safe to do so P405 - Store locked up P501 - Dispose of contents/container Dispose in a safe manner in accordance with local/national regulations CGA-PG05 - Use a back flow preventive device in the piping. CGA-PG20+CGA-PG10 - Use only with equipment of compatible materials of construction and rated for cylinder pressure. CGA-PG22 - Use only with equipment cleaned for oxygen service. CGA-PG12 - Do not open valve until connected to equipment prepared for use. CGA-PG18 - When returning cylinder, install leak tight valve outlet cap or plug. CGA-PG21 - Open valve slowly. CGA-PG06 - Close valve after each use and when empty. CGA-PG02 - Protect from sunlight when ambient temperature exceeds 52°C (125°F).

Other hazards which do not result in classification

None. 2.4.

Ingredient(s) with unknown acute toxicity

No data available