80-188-B/J1480-B LACQUER FOR GREY BASECOAT

PPG VIETNAM

Revision date : 2026-06-18

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08 GHS02
Health risk rating 4
Safety risk rating 3
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

64-19-7

Name of the chemical

acetic acid

Concentration

≤2.5

EC/CAS

67-56-1

Name of the chemical

Methanol

Concentration

≤1.9

EC/CAS

64-18-6

Name of the chemical

Formic acid

Concentration

<1

EC/CAS

64-17-5

Name of the chemical

Ethanol

Concentration

≤0.3

General Information

Version

04

Revision date

2026-06-18

Product name

80-188-B/J1480-B LACQUER FOR GREY BASECOAT

Chemical name

and supplier information

1.2.1 Relevant identified uses

Coating. Paint. Painting-related materials Industrial applications

1.2.2. Uses advised against

Product is not intended, labelled or packaged for consumer use

supplier name

PPG VIETNAM

Emergency telephone

+(84)-444581938

Icons in SDS

GHS02 GHS07 GHS08 M004 M008 M009 M010 M011

Company Information

company name

PPG VIETNAM

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H225, H303, H315, H319, H371, H373

Hazard statements

Code

Statements

H225

Highly Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Ingredient(s) with unknown acute toxicity

14.7% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 14.7%

Signal word

Danger

Hazard statements

Highly flammable liquid and vapor. May be harmful if swallowed. Causes skin irritation. Causes serious eye irritation. May cause damage to organs. May cause damage to organs through prolonged or repeated exposure. (bladder)

Prevention

Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not breathe vapor. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.

Response

IF exposed or concerned: Call a POISON CENTER or doctor. IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. If skin irritation occurs: Get medical advice or attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.

Storage

Store locked up.

Disposal

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Principle Routes of Exposure

Not available.

Other hazards which do not result in classification

Contains a substance that may emit formaldehyde if stored beyond its shelf life and/ or during cure at curing temperatures greater than 60C ( 140F).

2.1 Classification of the substance or mixture

FLAMMABLE LIQUIDS - Category 2 substance or mixture ACUTE TOXICITY (oral) - Category 5 SKIN IRRITATION - Category 2 EYE IRRITATION - Category 2A SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) - Category 2 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute oral toxicity: 14.7% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 14.7%

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.