Note: Ingredients listed on restricted chemical lists
EC/CAS
2451-62-9
Name of the chemical
1,3,5-Tris(oxiran-2-ylmethyl)-1,3,5-triazinane-2,4,6-trione (TGIC)
Concentration
1-<10
EC/CAS
26741-53-7
Name of the chemical
bis(2,4-di-tert-butylphenyl) pentaerythritol diphosphite
Concentration
0.1-<1
EC/CAS
77-99-6
Name of the chemical
1,1,1-trimethylolpropane
Concentration
0.1-<1
General Information
Revision date
2025-08-21
Product name
POLYESTER POWDER
1.2.1 Relevant identified uses
Industrial applications
supplier name
PPG Powder Coatings (Shanghai) Co., Ltd
Emergency telephone
00 86 532 83889090
Icons in SDS
Company Information
company name
PPG Powder Coatings (Shanghai) Co., Ltd
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H315, H317, H319, H335, H340, H412
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
toxicity: 32.6%
Signal word
Warning
Hazard statements
Suspected of causing cancer. May form combustible dust concentrations in air.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection.
Response
IF exposed or concerned: Get medical advice or attention.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Keep container tightly closed. Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Sanding and grinding dusts may be harmful if inhaled. Prevent dust accumulation. Emits toxic fumes when heated. Hazards identified when used : Photosensitive agents : In case of accidental eye contact, avoid direct exposure to the sun or other sources of UV light as severe irritation including burns may result. These reactions can be delayed – get medical attention if pain, irritation or blistering occurs after contact. In case of accidental skin contact, avoid direct exposure to the sun or other sources of UV light as severe irritation including burns may result. These reactions can be delayed – get medical attention if pain, irritation, rash or blistering occurs after contact.
2.3 Other hazards
Fine dust clouds may form explosive mixtures with air. Handling and/or processing of this material may generate a dust which can cause mechanical irritation of the eyes, skin, nose and throat.
2.1 Classification of the substance or mixture
CARCINOGENICITY - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute inhalation toxicity: 32.6%
