Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
≥1.0-≤5.0
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
≤1.0
EC/CAS
96-29-7
Name of the chemical
2-Butanonoxim (2020/1182)
Concentration
<1.0
General Information
Revision date
2016-09-04
Product name
SIGMADUR 500 US GREEN S1032 BASE
Manufacturer Name
PPG Industries, Inc
Emergency telephone
(412) 434-4515 (U.S.
Icons in SDS
Company Information
company name
PPG Industries, Inc
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 3 CARCINOGENICITY - Category 2
Ingredient(s) with unknown acute toxicity
68.3%
Signal word
Warning
Hazard statements
Flammable liquid and vapor. Suspected of causing cancer.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating, lighting and all material-handling equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Keep container tightly closed.
Response
IF exposed or concerned Get medical attention. IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water or shower. Photosensitive agents : In case of accidental eye contact, avoid concurrent exposure to the sun or other sources of UV light which may increase the sensitivity of the eyes. In case of accidental skin contact, avoid concurrent exposure to the sun or other sources of UV light which may increase the sensitivity of skin.
Storage
Store locked up. Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Sanding and grinding dusts may be harmful if inhaled. Repeated exposure to high vapor elements concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated. DANGER - RAGS, STEEL WOOL OR WASTE SOAKED WITH THIS PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF IMPROPERLY DISCARDED. IMMEDIATELY AFTER EACH USE, PLACE RAGS, STEEL WOOL OR WASTE IN A SEALED WATER-FILLED METAL CONTAINER.
2.3 Other hazards
Prolonged or repeated contact may dry skin and cause irritation.
