Note: Ingredients listed on restricted chemical lists
EC/CAS
1675-54-3
Name of the chemical
2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane
Concentration
10-<30
EC/CAS
68512-30-1
Name of the chemical
Phenol, methylstyrenated
Concentration
1-<10
EC/CAS
100-51-6
Name of the chemical
Benzyl Alcohol
Concentration
1-<10
EC/CAS
84852-15-3
Name of the chemical
Nonylphenol (NP), mixed isomers
Concentration
1-<10
General Information
Version
7.01
Revision date
2026-02-26
Product name
SIGMACOVER 630 BASE BLACK
1.2.1 Relevant identified uses
Coating
supplier name
PPG Industries Australia Pty Limited
Emergency telephone
1-412-391-1618
Icons in SDS
Company Information
company name
PPG Industries Australia Pty Limited
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H318
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture FLAMMABLE LIQUIDS - Category 3 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1 SKIN SENSITISATION - Category 1
Signal word
DANGER
Hazard statements
Flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage.
Prevention
Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating or lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapour. Wash thoroughly after handling.
Response
IF ON SKIN Wash with plenty of water. If skin irritation or rash occurs Get medical advice or attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Storage
Not applicable.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Not applicable.
Other hazards which do not result in classification
Causes digestive tract burns. Prolonged or repeated contact may dry skin and cause irritation. Contains a substance that may emit formaldehyde if stored beyond its shelf life and/or during cure at curing temperatures greater than 60C/140F.
2.1 Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 3 substance or mixture SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1 SKIN SENSITISATION - Category 1
