Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
10-<30
EC/CAS
141-78-6
Name of the chemical
acetic acid, ethyl ester
Concentration
10-<30
EC/CAS
50-00-0
Name of the chemical
Formaldehyde
Concentration
<1
General Information
Version
9
Revision date
2025-12-24
Product name
MULTIBUILD CLEAR G30
1.2.1 Relevant identified uses
Coating
supplier name
PPG Industries Australia Pty Limited
Emergency telephone
1-412-391-1618
Icons in SDS
Company Information
company name
PPG Industries Australia Pty Limited
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H225, H318, H336, H350
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture FLAMMABLE LIQUIDS - Category 2 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1 CARCINOGENICITY - Category 1 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE (Narcotic effects) - Category 3
Signal word
DANGER
Hazard statements
Highly flammable liquid and vapour. Causes serious eye damage. May cause drowsiness or dizziness. May cause cancer.
Prevention
Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating or lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapour.
Response
IF exposed or concerned Get medical advice or attention. IF INHALED Call a POISON CENTER or doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Storage
Store in a well-ventilated place. Keep container tightly closed.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Repeated exposure may cause skin dryness or cracking.
Other hazards which do not result in classification
Prolonged or repeated contact may dry skin and cause irritation. Contains a substance that may emit formaldehyde if stored beyond its shelf life and/or during cure at curing temperatures greater than 60C/140F.
2.1 Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 2 substance or mixture SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1 CARCINOGENICITY - Category 1 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE (Narcotic effects) -
