Note: Ingredients listed on restricted chemical lists
EC/CAS
4986-89-4
Name of the chemical
2,2-bis[[(1-oxoallyl)oxy]methyl]-1,3-propanediyl diacrylate
Concentration
10-30 3-7
EC/CAS
15625-89-5
Name of the chemical
2-ethyl-2-[[(1-oxoallyl)oxy]methyl]-1,3-propanediyl diacrylate; 2,2-bis(acryloyloxymethyl)butyl acrylate; trimethylolpropane triacrylate
Concentration
1-5
EC/CAS
75980-60-8
Name of the chemical
Diphenyl(2,4,6-trimethylbenzoyl)phosphinoxid
Concentration
0.1-1
General Information
Version
3.01
Revision date
2026-05-25
Product name
WB LOW GLOSS UV CLEARCOAT
1.2.1 Relevant identified uses
Industrial applications
Manufacturer Name
PPG Industries, Inc
Icons in SDS
Company Information
company name
PPG Industries, Inc
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H351, H361
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
35.1% (oral), 39.1% (dermal), 43.8% (inhalation)
Signal word
Warning
Hazard statements
May cause an allergic skin reaction. Suspected of causing cancer. Suspected of damaging fertility or the unborn child.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Avoid breathing vapor. Contaminated work clothing must not be allowed out of the workplace.
Response
IF exposed or concerned Get medical advice or attention. IF ON SKIN Wash with plenty of water. If skin irritation or rash occurs: Get medical advice or attention. Take off contaminated clothing and wash it before reuse.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Moisture-sensitive material. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. Skin contact to isocyanate monomer may lead to allergic lung reaction. Based on the properties of the isocyanate components and considering toxicological data on similar mixtures, this mixture may cause acute irritation and/or sensitization of the respiratory system, leading to an asthmatic condition, wheezing and tightness of the chest. Sensitized persons may subsequently show asthmatic symptoms when exposed to atmospheric concentrations well below the OEL. Repeated exposure may lead to permanent respiratory disability. Persons with a history of skin sensitization problems or asthma, allergies or chronic or recurrent respiratory disease should not be employed in any process in which this product is used. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated. Hazards identified when used : Photosensitive agents : In case of accidental eye contact, avoid direct exposure to the sun or other sources of UV light as severe irritation including burns may result. These reactions can be delayed – get medical attention if pain, irritation or blistering occurs after contact. In case of accidental skin contact, avoid direct exposure to the sun or other sources of UV light as severe irritation including burns may result. These reactions can be delayed – get medical attention if pain, irritation, rash or blistering occurs after contact.
2.3 Other hazards
Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classification of the substance or mixture
substance or mixture CARCINOGENICITY - Category 2 TOXIC TO REPRODUCTION - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 35.1% (oral), 39.1% (dermal), 43.8% (inhalation)
