Note: Ingredients listed on restricted chemical lists
EC/CAS
110-97-4
Name of the chemical
1,1'-iminodipropan-2-ol
Concentration
≥1.0-≤5.0
EC/CAS
111-76-2
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
≥1.0-≤3.9
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
<1.0
General Information
Version
5.02
Revision date
2026-03-06
Product name
POWERCRON RED PASTE
1.2.1 Relevant identified uses
Industrial applications
1.2.2. Uses advised against
Coating. Paints. Painting-related materials
Manufacturer Name
PPG Industries, Inc
Emergency telephone
1-888-774-2001
Icons in SDS
Company Information
company name
PPG Industries, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H318, H350
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture SKIN IRRITATION - Category 2 SERIOUS EYE DAMAGE - Category 1 CARCINOGENICITY - Category 1B Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 10.9% (oral), 17.2% (dermal), 47.3% (inhalation)
Signal word
Danger
Hazard statements
H315 - Causes skin irritation. H318 - Causes serious eye damage. H350 - May cause cancer.
Prevention
P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P280 - Wear protective gloves, protective clothing and eye or face protection. P264 - Wash thoroughly after handling.
Response
P308 + P313 - IF exposed or concerned: Get medical advice or attention. P302 + P352 - IF ON SKIN: Wash with plenty of water. P332 + P313 - If skin irritation occurs: Get medical advice or attention. P362 + P364 - Take off contaminated clothing and wash it before reuse. P305 + P351 + P338, P310 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Storage
P405 - Store locked up.
Disposal
P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
Sanding and grinding dusts may be harmful if inhaled. Contains a substance that may emit formaldehyde if stored beyond its shelf life and/or during cure at curing temperatures greater than 60C ( 140F). Prolonged or repeated contact may dry skin and cause irritation. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. Emits toxic fumes when heated. See toxicological information (Section 11)
2.1 Classification of the substance or mixture
SKIN IRRITATION - Category 2 substance or mixture SERIOUS EYE DAMAGE - Category 1 CARCINOGENICITY - Category 1B Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 10.9% (oral), 17.2% (dermal), 47.3% (inhalation)
