Note: Ingredients listed on restricted chemical lists
EC/CAS
616-38-6
Name of the chemical
dimethyl carbonate
Concentration
≥1.0-≤4.9
EC/CAS
13983-17-0
Name of the chemical
wollastonite
Concentration
≥1.0-≤5.0
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
≥0.10-≤2.5
EC/CAS
91-20-3
Name of the chemical
Naphthalene,3
Concentration
≤2.0
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
≤1.9
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
<1.0
General Information
Version
20
Revision date
2020-06-12
Product name
HI-TEMP 1027 BLACK
1.2.1 Relevant identified uses
Professional applications, Used by spraying
Manufacturer Name
PPG Industries, Inc
Icons in SDS
Company Information
company name
PPG Industries, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H350, H361, H373
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
68.6% (Oral), 83% (Dermal), 69.8% (Inhalation)
Signal word
Danger
Hazard statements
Flammable liquid and vapor. May cause cancer. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. (hearing organs)
Prevention
Obtain special instructions before use. Wear protective gloves. Wear protective clothing. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating or lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Do not breathe vapor.
Response
IF exposed or concerned: Get medical advice or attention.
Storage
Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Sanding and grinding dusts may be harmful if inhaled. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. This product either contains formaldehyde or is capable of releasing formaldehyde above 0.5 ppm under certain conditions. Formaldehyde is a known cancer hazard, a skin sensitizer and a respiratory sensitizer. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated.
2.3 Other hazards
Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classification of the substance or mixture
CARCINOGENICITY - Category 1A TOXIC TO REPRODUCTION - Category 2 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 68.6% (Oral), 83% (Dermal), 69.8% (Inhalation)
