Note: Ingredients listed on restricted chemical lists
EC/CAS
126-30-7
Name of the chemical
2,2-dimethyl-1,3-propanediol
Concentration
1-5
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
1-5
General Information
Version
20.01
Revision date
2026-06-09
Product name
FLATTING INTERMEDIATE
1.2.1 Relevant identified uses
Industrial applications
Manufacturer Name
PPG Industries, Inc
Icons in SDS
Company Information
company name
PPG Industries, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H318, H332, H336, H351
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
29.7% (oral), 50.4% (dermal), 50.4% (inhalation)
Signal word
Danger
Hazard statements
Flammable liquid and vapor. Causes serious eye damage. Harmful if inhaled. May cause drowsiness or dizziness. Suspected of causing cancer.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid breathing vapor.
Response
IF exposed or concerned Get medical advice or attention. IF INHALED Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Storage
Store locked up. Store in a well-ventilated place. Keep container tightly closed.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. This product either contains formaldehyde or is capable of releasing formaldehyde above 0.5 ppm under certain conditions. Formaldehyde is a known cancer hazard, a skin sensitizer and a respiratory sensitizer. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated.
2.3 Other hazards
Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classification of the substance or mixture
ACUTE TOXICITY (inhalation) - Category 4 SERIOUS EYE DAMAGE - Category 1 CARCINOGENICITY - Category 2 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects) - Category 3 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 29.7% (oral), 50.4% (dermal), 50.4% (inhalation)