Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
≥1.0-≤5.0
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
≤1.0
General Information
Version
3
Revision date
2020-06-17
Product name
CONSTRUCTION YELLOW HS URETHANE
1.2.1 Relevant identified uses
Industrial applications
1.2.2. Uses advised against
Coating. Paints. Painting-related materials
Manufacturer Name
PPG Industries, Inc
Icons in SDS
Company Information
company name
PPG Industries, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H303, H350
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture FLAMMABLE LIQUIDS - Category 3 ACUTE TOXICITY (oral) - Category 5 CARCINOGENICITY - Category 1A Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 37.7% (Oral), 44.3% (Dermal), 65.9% (Inhalation)
Signal word
Danger
Hazard statements
H226 - Flammable liquid and vapor. H303 - May be harmful if swallowed. H350 - May cause cancer.
Prevention
P202 - Do not handle until all safety precautions have been read and understood. P280 - Wear protective gloves. Wear protective clothing. Wear eye or face protection. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Response
P308 + P313 - IF exposed or concerned: Get medical advice or attention.
Storage
Not applicable.
Disposal
Not applicable.
Other hazards which do not result in classification
Sanding and grinding dusts may be harmful if inhaled. Prolonged or repeated contact may dry skin and cause irritation. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Emits toxic fumes when heated. See toxicological information (Section 11)
2.1 Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 3 substance or mixture ACUTE TOXICITY (oral) - Category 5 CARCINOGENICITY - Category 1A Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 37.7% (Oral), 44.3% (Dermal), 65.9% (Inhalation)
