2.8/3.5 voe 2K HS POLYURETHANE TOPCOAT (AUE-360) SF BLACK

SECTION 2: Hazards identification

29 CFR 1910.1200) OSHA/HCS status This material Is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

2.1 Classification of the substance or mixture

FLAMMABLE LIQUIDS· Category 3 ACUTE TOXICITY (oral) - Category 4 ACUTE TOXICITY (inhalation) Category 4 CARCINOGENICITY - Category 2

Ingredient(s) with unknown acute toxicity

58. 7% ~!:IS label elements

Hazard pictograms

Sign3l word Warning United States S S I li!l 0010/0023 Product code AU36·FP901 Date of IHue 13 April 2015 Version 3 Product name 2.8/3.5 VOC 2K HS POLYURETHANE TOPCOAT (AUE-360) SF BLACK

Hazard statements

Flammable liquid and vapor. Hanmlul ii swallowed or If Inhaled. Suspected of causing cancer. Precayt!!WllCll litllt'ments

Prevention

Obtain special Instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equ'1pment as required. Wear protective gloves. Wear eye or lace protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventllatlng, lighting and all material-handling equipment. Use only non- sparking tools. Take precautionary measures against static discharge. Keep container tightly closed. Use only outdoors or in a well-ventilated area. Avoid breathing vapor. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.

Response

IF exposed or concerned Get medical attention. IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician ii you feel unwell. IF SWALLOWED: Call a POISON CENTER or physician ii you feel unwell. Rinse mouth. IF ON SKIN (or hair): Take off Immediately all contaminated clothing. Rinse skin with water or shower.

Storage

Store locked up. Store in a well-ventilated place. Keep cool.

Disposal

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Supplemental label elements

Repeated exposure to high vapor concentrations may cause irritation of the respiratory elements system and penmanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated.

2.3 Other hazards

Prolonged or repeated contact may dry skin and cause irritation. I Section 3. Composition/information on ingredients Substance/mixture Mixture Product name : 2.8/3.5 voe 2K HS POLYURETHANE TOPCOAT (AUE-360) SF BLACK Ingredient name % CAS number lll!iptan-2-one 10 - 30 110-43-0 2-methoxy-1-methylethyl acetate 5 -10 108-65-6 pentane-2,4-dione 1 - 5 123-54-6 n·butyl acetate 1 - 5 123-86-4 carbon black, respirable powder 0.1 - 1 1333-86-4 methyl methacrylate 0.1 - 1 B0-62-6 2-hydroxyethyl acrylate 0.1 - 1 818-61-1 n-butyl acrylate 0.1 - 1 141-32-2 SUB codes represent substances without registered CAS Numbers. Any concentration shown as a range is to protect confidentiality or is due to batch variation. There are no additional Ingredients present whic h, within the c urrent knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. Unitod States Page: 211s J S S I l1ll 0011/0023 Product code AU36·FP901 Date of Issue 13 April 2015 Version 3 Product name 2.8/3.5 VOC 2K HS POLYURETHANE TOPCOAT (AUE-360) SF BLACK