Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
30-<60
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
3-<5
EC/CAS
21645-51-2
Name of the chemical
Aluminium hydroxide
Concentration
1-<2
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
1-<2
EC/CAS
91-20-3
Name of the chemical
Naphthalene,3
Concentration
0.5-<1
EC/CAS
50-00-0
Name of the chemical
Formaldehyde
Concentration
0-<0.1
General Information
Version
6
Revision date
2026-01-05
Product name
POLYCRON WHITE C2
1.2.1 Relevant identified uses
Coating. Paints. Painting-related materials
1.2.2. Uses advised against
Reason
supplier name
PPG Industries Colombia Ltda
Icons in SDS
Company Information
company name
PPG Industries Colombia Ltda
e-mail address of the competent person responsible for the Safety Data Sheet
HazComLatam@ppg.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H316, H317, H412
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
54.7% (oral), 64.2% (dermal), 56.6% (inhalation)
Signal word
Danger
Hazard statements
Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Suspected of causing cancer. Suspected of damaging fertility or the unborn child. May form combustible dust concentrations in air.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Wear respiratory protection. Avoid breathing dust or mist. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.
Response
IF exposed or concerned Get medical advice or attention. IF INHALED Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms Call a POISON CENTER or doctor. IF ON SKIN Wash with plenty of water If skin irritation or rash occurs: Get medical advice or attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Keep container tightly closed. Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Sanding and grinding dusts may be harmful if inhaled. Prevent dust accumulation. Emits toxic fumes when heated.
2.3 Other hazards
Fine dust clouds may form explosive mixtures with air. Handling and/or processing of this material may generate a dust which can cause mechanical irritation of the eyes, skin, nose and throat.
2.1 Classification of the substance or mixture
SKIN IRRITATION - Category 2 EYE IRRITATION - Category 2A RESPIRATORY SENSITIZATION - Category 1 SKIN SENSITIZATION - Category 1 CARCINOGENICITY - Category 2 TOXIC TO REPRODUCTION - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 54.7% (oral), 64.2% (dermal), 56.6% (inhalation)