TM WHT HYD BC2000

Hazard statements (CLP)

H350

Code

Statements

H350

May cause cancer

SECTION 2: Hazards identification

Ingredient(s) with unknown acute toxicity

55.3% (oral), 92% (dermal), 61.6% (inhalation)

Signal word

Danger

Hazard statements

May cause cancer. May form combustible dust concentrations in air.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection.

Response

IF exposed or concerned: Get medical advice or attention.

Storage

Store locked up.

Disposal

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Supplemental label elements

Keep container tightly closed. Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Sanding and grinding dusts may be harmful if inhaled. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Prevent dust accumulation. Emits toxic fumes when heated. Hazards identified when used : Avoid all contact with molten thermoplastic. When hot, thermoplastic material liquifies, becomes very tacky and will adhere to anything it touches. Molten thermoplastic can cause third degree burns if it comes in contact with skin. For thermal skin burns, immediately flush the area with plenty of cold water and seek immediate medical attention. Remove contaminated clothing only if not adhering to skin. If clothing or molten thermoplastic material is adhering to skin, do not attempt to remove. Removal could result in severe tissue damage. For thermal eye burns, immediately flush eye with plenty of cold water. Do not attempt to remove contact lenses. Cover eye with sterile dressing and seek immediate medical attention.

2.3 Other hazards

Fine dust clouds may form explosive mixtures with air. Handling and/or processing of this material may generate a dust which can cause mechanical irritation of the eyes, skin, nose and throat.

2.1 Classification of the substance or mixture

CARCINOGENICITY - Category 1A Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 55.3% (oral), 92% (dermal), 61.6% (inhalation)