Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
10-<20
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
3-<5
EC/CAS
111-76-2
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
1-<3
General Information
Version
5.04
Revision date
2025-05-01
Product name
HIGH SOLID UNIVERSAL CLEAR
1.2.1 Relevant identified uses
Coating Industrial applications, Used by spraying
1.2.2. Uses advised against
Product is not intended, labelled or packaged for consumer use
supplier name
PPG Coatings (Thailand) Co., Ltd
Emergency telephone
66 (0) 23153133, 66 (0) 27067997
Icons in SDS
Company Information
company name
PPG Coatings (Thailand) Co., Ltd
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H313, H315, H319, H332, H412
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture FLAMMABLE LIQUIDS - Category 2 ACUTE TOXICITY (dermal) - Category 5 ACUTE TOXICITY (inhalation) - Category 4 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A AQUATIC HAZARD (ACUTE) - Category 3 AQUATIC HAZARD (LONG-TERM) - Category 3 Percentage of the mixture consisting of ingredient(s) of unknown acute dermal toxicity: 49.4%
Ingredient(s) with unknown acute toxicity
toxicity: 51.2% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 46.9%
Signal word
Danger
Hazard statements
Highly flammable liquid and vapor. May be harmful in contact with skin. Causes skin irritation. Causes serious eye irritation. Harmful if inhaled. Harmful to aquatic life with long lasting effects.
Prevention
Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating or lighting equipment. Use non- sparking tools. Take action to prevent static discharges. Keep container tightly closed. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Avoid breathing vapor. Wash thoroughly after handling.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. IF ON SKIN: Call a POISON CENTER or doctor if you feel unwell. If skin irritation occurs: Get medical advice or attention. Take off contaminated clothing and wash before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 2 substance or mixture ACUTE TOXICITY (dermal) - Category 5 ACUTE TOXICITY (inhalation) - Category 4 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A AQUATIC HAZARD (ACUTE) - Category 3 AQUATIC HAZARD (LONG-TERM) - Category 3 Percentage of the mixture consisting of ingredient(s) of unknown acute dermal toxicity: 49.4% Percentage of the mixture consisting of ingredient(s) of unknown acute inhalation toxicity: 51.2% Section 2. Hazards identification Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 46.9%
