Note: Ingredients listed on restricted chemical lists
EC/CAS
202-849-4/100-41-4
Name of the chemical
Ethylbenzene
Concentration
≥1.0-≤5.0
EC/CAS
918-481-9/64742-48-9
Name of the chemical
Naphtha (petroleum), hydrotreated heavy
Concentration
≥1.0-≤5.0
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
≥1.0-≤5.0
EC/CAS
284-325-5/84852-15-3
Name of the chemical
Nonylphenol (NP), mixed isomers
Concentration
≥0.30-<2.5
EC/CAS
203-625-9/108-88-3
Name of the chemical
Toluene
Concentration
≤0.30
General Information
Version
21.02
Revision date
2022-04-19
Product name
SIGMAPRIME 200 BASE
1.2.1 Relevant identified uses
Professional applications, Used by spraying
1.2.2. Uses advised against
Product is not intended, labelled or packaged for consumer use
Emergency telephone
+32-33606311, +32-33606435, +31 20 4075210
Icons in SDS
Company Information
company name
PPG Coatings Belgium BV
e-mail address of the competent person responsible for the Safety Data Sheet
Product.Stewardship.EMEA@ppg.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H318, H373, H411
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
1272/2008]
Product definition
Mixture
Signal word
Danger
Hazard statements
Flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. May cause damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects.
Prevention
Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment. Do not breathe vapour.
Response
Collect spillage. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage
Not applicable.
Disposal
Not applicable. P280, P210, P273, P260, P391, P305 + P351 + P338
Hazardous Ingredients
Epoxy Resin (700<MW<=1100) 2-methylpropan-1-ol Quartz (SiO2) Octadecanamide, N,N'-1,6-hexanediylbis[12-hydroxy-
Supplemental label elements
Not applicable.
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable.
Special packaging requirements
Containers to be fitted with child-resistant fastenings : Not applicable.
Tactile warning of danger
Not applicable.
2.3 Other hazards
Product meets the criteria : This mixture does not contain any substances that are assessed to be a PBT or a vPvB. for PBT or vPvB
Other hazards which do not result in classification
Causes digestive tract burns. Prolonged or repeated contact may dry skin and cause irritation. Contains a substance that may emit formaldehyde if stored beyond its shelf life and/or during cure at curing temperatures greater than 60C/140F.
