Note: Ingredients listed on restricted chemical lists
EC/CAS
215-535-7/1330-20-7
Name of the chemical
Xylene
Concentration
≥10-≤24 ≥10-≤22 10%
EC/CAS
204-658-1/123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
≥5.0 - ≤10
EC/CAS
203-905-0/111-76-2
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
≥1.0 - ≤5.0
EC/CAS
200-751-6/71-36-3
Name of the chemical
1-butanol
Concentration
≥1.0 - ≤5.0
EC/CAS
202-849-4/100-41-4
Name of the chemical
Ethylbenzene
Concentration
≥1.0 - ≤4.4
EC/CAS
200-001-8/50-00-0
Name of the chemical
Formaldehyde
Concentration
≥25% <25% ≥25% <25% ≥5%
General Information
Version
8
Revision date
2026-02-28
Product name
MEDIUM BOLDER
1.2.1 Relevant identified uses
Industrial applications
1.2.2. Uses advised against
Product is not intended, labelled or packaged for consumer use
Emergency telephone
+27 (0)861 555 777
Icons in SDS
Company Information
company name
PPG Coating Services
e-mail address of the competent person responsible for the Safety Data Sheet
PS.ACEMEA@ppg.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H304, H315, H317, H318, H335, H336, H350, H412
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
1272/2008] Classification of the substance or mixture
Product definition
Mixture
Signal word
Danger
Hazard statements
Flammable liquid and vapour. May be fatal if swallowed and enters airways. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. May cause respiratory irritation. May cause drowsiness or dizziness. May cause cancer. Harmful to aquatic life with long lasting effects.
Prevention
Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Response
IF exposed or concerned: Get medical advice or attention. IF SWALLOWED: Immediately call a POISON CENTER or doctor.
Storage
Store in a well-ventilated place. Keep container tightly closed.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations. P280, P210, P308 + P313, P301 + P310, P403 + P233, P501
Hazardous Ingredients
xylene; Hydrocarbons, C9, aromatics > 0.1% cumene; n-butyl acetate; butan-1-ol; N,N'- ethane-1,2-diylbis(12-hydroxyoctadecan-1-amide) and formaldehyde
Supplemental label elements
Not applicable. elements
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Restricted to professional users.
Special packaging requirements
Containers to be fitted Not applicable. with child-resistant fastenings
Tactile warning of danger
Not applicable.
2.3 Other hazards
Product meets the criteria This mixture does not contain any substances that are assessed to be a PBT or a for PBT or vPvB according vPvB. to Regulation (EC) No.
Other hazards which do not result in classification
Prolonged or repeated contact may dry skin and cause irritation. Contains a substance that may emit formaldehyde if stored beyond its shelf life and/or during cure at curing temperatures greater than 60C/140F.
2.1 Classification of the substance or mixture
Product definition : Mixture Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] Flam. Liq. 3, H226 Skin Irrit. 2, H315 Eye Dam. 1, H318 Skin Sens. 1, H317 Carc. 1B, H350 STOT SE 3, H335 STOT SE 3, H336 Asp. Tox. 1, H304 Aquatic Chronic 3, H412 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended. See Section 16 for the full text of the H statements declared above. See Section 11 for more detailed information on health effects and symptoms.
