Note: Ingredients listed on restricted chemical lists
EC/CAS
200-662-2/67-64-1
Name of the chemical
acetone
Concentration
≥10 - ≤25
EC/CAS
227-561-6/5888-33-5
Name of the chemical
Exo-1,7,7-trimethylbicyclo[2.2.1]hept-2-yl acrylate
Concentration
≥10-≤14
EC/CAS
310-194-1/1332-58-7
Name of the chemical
kaolin
Concentration
≥5.0-≤10 ≥5.0-≤10
EC/CAS
231-944-3/7779-90-0
Name of the chemical
Trizinc bis(orthophosphate)
Concentration
≥0.30- ≤2.8 ≥10%
EC/CAS
256-032-2/42978-66-5
Name of the chemical
(1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)] diacrylate
Concentration
≥ 10%
EC/CAS
423-340-5/162881-26-7
Name of the chemical
Phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide
Concentration
<1.0
General Information
Revision date
2025-09-23
Product name
D8080 UV CURED PRIMER SURFACER
1.2.1 Relevant identified uses
Professional applications, Used by spraying
1.2.2. Uses advised against
Product is not intended, labelled or packaged for consumer use
Emergency telephone
+27 (0)861 555 777
Icons in SDS
Company Information
company name
PPG Coating Services
e-mail address of the competent person responsible for the Safety Data Sheet
PS.ACEMEA@ppg.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H315, H317, H319, H336, H411
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
SECTION 2: Hazards identification
1272/2008] Classification of the substance or mixture
Product definition
Mixture
Signal word
Danger
Hazard statements
Extremely flammable aerosol. Pressurised container: may burst if heated. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
Prevention
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use.
Response
Collect spillage.
Storage
Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations. P210, P211, P251, P391, P410 + P412, P501
Hazardous Ingredients
acetone; exo-1,7,7-trimethylbicyclo[2.2.1]hept-2-yl acrylate; (1-methyl-1,2-ethanediyl)bis [oxy(methyl-2,1-ethanediyl)] diacrylate; 2-Propenoic acid, 2-methyl-, 2-hydroxyethyl ester, reaction products with phosphorus oxide; 2-(2-ethoxyethoxy)ethyl acrylate and phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide
Supplemental label elements
Not applicable. elements
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable.
Special packaging requirements
Containers to be fitted Not applicable. with child-resistant fastenings
Tactile warning of danger
Not applicable.
2.3 Other hazards
Product meets the criteria This mixture does not contain any substances that are assessed to be a PBT or a for PBT or vPvB according vPvB. to Regulation (EC) No.
Other hazards which do not result in classification
Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classification of the substance or mixture
Product definition : Mixture Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] Aerosol 1, H222, H229 Skin Irrit. 2, H315 Eye Irrit. 2, H319 Skin Sens. 1, H317 STOT SE 3, H336 Aquatic Chronic 2, H411 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended. See Section 16 for the full text of the H statements declared above. See Section 11 for more detailed information on health effects and symptoms.
