Note: Ingredients listed on restricted chemical lists
EC/CAS
50-00-0
Name of the chemical
Formaldehyde
Concentration
0.1-<0.3
General Information
Version
2.03
Revision date
2025-08-21
Product name
RESIN BLEND
1.2.1 Relevant identified uses
Resins Industrial applications
1.2.2. Uses advised against
Product is not intended, labelled or packaged for consumer use
supplier name
PPG Asian Paints Private Limited
Emergency telephone
+91 22 6815 8700
Icons in SDS
Company Information
company name
PPG Asian Paints Private Limited
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H317, H334, H350
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture FLAMMABLE LIQUIDS - Category 3 RESPIRATORY SENSITISATION - Category 1 SKIN SENSITISATION - Category 1 CARCINOGENICITY - Category 1B Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 91.6%
Signal word
Danger
Hazard statements
Flammable liquid and vapour. May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause cancer.
Prevention
Obtain, read and follow all safety instructions before use. Wear protective gloves, protective clothing, eye protection, face protection, or hearing protection. Wear respiratory protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour. Contaminated work clothing should not be allowed out of the workplace.
Response
IF exposed or concerned, get medical advice. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Get emergency medical help immediately. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water. IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical help. Take off contaminated clothing and wash it before reuse.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
Prolonged or repeated contact may dry skin and cause irritation. Contains a substance that may emit formaldehyde if stored beyond its shelf life and/or during cure at curing temperatures greater than 60C/140F.
2.1 Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 3 substance or mixture RESPIRATORY SENSITISATION - Category 1 SKIN SENSITISATION - Category 1 CARCINOGENICITY - Category 1B Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 91.6%
