Note: Ingredients listed on restricted chemical lists
EC/CAS
111-76-2
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
10-<20
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
10-<20
EC/CAS
126-30-7
Name of the chemical
2,2-dimethyl-1,3-propanediol
Concentration
5-<10
General Information
Version
11.04
Revision date
2026-02-28
Product name
LS1 FINE SILVER MET
1.2.1 Relevant identified uses
Coating. Paint. Painting-related materials Industrial applications
1.2.2. Uses advised against
Product is not intended, labelled or packaged for consumer use
supplier name
PPG Asian Paints Private Limited
Emergency telephone
+91 22 6815 8700
Icons in SDS
Company Information
company name
PPG Asian Paints Private Limited
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H304, H313, H315, H318, H331, H402
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture FLAMMABLE LIQUIDS - Category 3 ACUTE TOXICITY (oral) - Category 5 ACUTE TOXICITY (dermal) - Category 5 ACUTE TOXICITY (inhalation) - Category 3 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1 ASPIRATION HAZARD - Category 1 SHORT-TERM (ACUTE) AQUATIC HAZARD - Category 3
Ingredient(s) with unknown acute toxicity
31% Percentage of the mixture consisting of ingredient(s) of unknown acute dermal toxicity: 47.1% toxicity: 40.6% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 34.9%
Signal word
Danger
Hazard statements
Flammable liquid and vapour. May be harmful if swallowed or in contact with skin. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye damage. Toxic if inhaled. Harmful to aquatic life.
Prevention
Wear protective gloves, protective clothing, eye protection, face protection, or hearing protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Avoid breathing vapour. Wash hands thoroughly after handling. Do not touch eyes.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. Get medical help. IF SWALLOWED: Get emergency medical help immediately. Get medical help. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water. IF ON SKIN: Get medical help. Wash with plenty of water. If skin irritation occurs: Get medical help. Take off contaminated clothing and wash it before reuse. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
Prolonged or repeated contact may dry skin and cause irritation. Contains a substance that may emit formaldehyde if stored beyond its shelf life and/or during cure at curing temperatures greater than 60C/140F.
2.1 Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 3 substance or mixture ACUTE TOXICITY (oral) - Category 5 ACUTE TOXICITY (dermal) - Category 5 ACUTE TOXICITY (inhalation) - Category 3 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1 ASPIRATION HAZARD - Category 1 SHORT-TERM (ACUTE) AQUATIC HAZARD - Category 3 Percentage of the mixture consisting of ingredient(s) of unknown acute oral toxicity: 31% Percentage of the mixture consisting of ingredient(s) of unknown acute dermal toxicity: 47.1% Percentage of the mixture consisting of ingredient(s) of unknown acute inhalation toxicity: 40.6% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 34.9%
