Note: Ingredients listed on restricted chemical lists
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
10-<20
General Information
Version
2.03
Revision date
2025-08-25
Product name
IRCOBOND Z-24 L CLEAR
1.2.1 Relevant identified uses
Pretreatment mixture Industrial applications
1.2.2. Uses advised against
Product is not intended, labelled or packaged for consumer use
supplier name
PPG Asian Paints Private Limited
Emergency telephone
+91 22 6815 8700
Icons in SDS
Company Information
company name
PPG Asian Paints Private Limited
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H290, H314, H332, H411
Hazard statements
Code
Statements
H290
May be corrosive to metals
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture CORROSIVE TO METALS - Category 1 ACUTE TOXICITY (inhalation) - Category 4 SKIN CORROSION/IRRITATION - Category 1A SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1 SHORT-TERM (ACUTE) AQUATIC HAZARD - Category 2 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 2
Ingredient(s) with unknown acute toxicity
toxicity: 15.1% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 35.9%
Signal word
Danger
Hazard statements
May be corrosive to metals. Causes severe skin burns and eye damage. Harmful if inhaled. Toxic to aquatic life with long lasting effects.
Prevention
Wear protective gloves, protective clothing and eye or face protection. Keep only in original packaging. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Avoid breathing vapour. Wash hands thoroughly after handling. Do not touch eyes.
Response
Collect spillage. Absorb spillage to prevent material damage. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get emergency medical help immediately. Get medical help. IF SWALLOWED: Get emergency medical help immediately. Rinse mouth. Do NOT induce vomiting. IF ON SKIN: Get emergency medical help immediately. Take off immediately all contaminated clothing. Immediately rinse with water for several minutes. Wash contaminated clothing before reuse. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical help.
Storage
Store locked up. Store in corrosive resistant container with a resistant inner liner.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
None known.
2.1 Classification of the substance or mixture
CORROSIVE TO METALS - Category 1 substance or mixture ACUTE TOXICITY (inhalation) - Category 4 SKIN CORROSION/IRRITATION - Category 1A SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1 SHORT-TERM (ACUTE) AQUATIC HAZARD - Category 2 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute inhalation toxicity: 15.1% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 35.9%
