Note: Ingredients listed on restricted chemical lists
EC/CAS
42978-66-5
Name of the chemical
(1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)] diacrylate
Concentration
25-<50
EC/CAS
15625-89-5
Name of the chemical
2-ethyl-2-[[(1-oxoallyl)oxy]methyl]-1,3-propanediyl diacrylate; 2,2-bis(acryloyloxymethyl)butyl acrylate; trimethylolpropane triacrylate
Concentration
0.3-<1
EC/CAS
128-37-0
Name of the chemical
2,6-di-tert-butyl-p-cresol
Concentration
0.1-<0.3
General Information
Version
1.07
Revision date
2026-04-16
Product name
ACRYLIC URETHANE POLYMER
1.2.1 Relevant identified uses
Resins Industrial applications
1.2.2. Uses advised against
Product is not intended, labelled or packaged for consumer use
supplier name
PPG Asian Paints Private Limited
Emergency telephone
+91 22 6815 8700
Icons in SDS
Company Information
company name
PPG Asian Paints Private Limited
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H313, H315, H317, H319, H335, H411
Hazard statements
Code
Statements
H313
May be harmful in contact with skin
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture ACUTE TOXICITY (dermal) - Category 5 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 2A SKIN SENSITISATION - Category 1 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE (Respiratory tract irritation) - Category 3 SHORT-TERM (ACUTE) AQUATIC HAZARD - Category 2 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute dermal toxicity: 59.7% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 59.7%
Signal word
Warning
Hazard statements
May be harmful in contact with skin. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause respiratory irritation. Toxic to aquatic life with long lasting effects.
Prevention
Wear protective gloves. Wear eye or face protection. Use only outdoors or in a well- ventilated area. Avoid release to the environment. Avoid breathing vapour. Wash hands thoroughly after handling. Do not touch eyes. Contaminated work clothing should not be allowed out of the workplace.
Response
Collect spillage. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN: Get medical help. Wash with plenty of water. If skin irritation or rash occurs Get medical help. If skin irritation occurs Get medical help Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical help. Get medical help if you feel unwell.
Storage
Store locked up. Store in a well-ventilated place. Keep container tightly closed.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
None known.
2.1 Classification of the substance or mixture
ACUTE TOXICITY (dermal) - Category 5 substance or mixture SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 2A SKIN SENSITISATION - Category 1 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE (Respiratory tract irritation) - Category 3 SHORT-TERM (ACUTE) AQUATIC HAZARD - Category 2 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute dermal toxicity: 59.7% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 59.7%
