Note: Ingredients listed on restricted chemical lists
EC/CAS
265-199-0/64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
≥25-≤50
EC/CAS
125304-04-3
Name of the chemical
A mixture of: isomers of 2-(2H-benzotriazol-2-yl)-4-methyl-(n)-dodecylphenol; isomers of 2-(2H-benzotriazol-2-yl)-4-methyl-(n)-tetracosylphenol; isomers of 2-(2H-benzotriazol-2-yl)-4-methyl-5,6-didodecyl-phenol. n=5 or 6
Concentration
≥1.0-≤5.0
General Information
Version
18
Revision date
2022-02-10
Product name
SIGMADUR CLEARCOAT BASE
1.2.1 Relevant identified uses
Professional applications, Used by spraying
1.2.2. Uses advised against
Product is not intended, labelled or packaged for consumer use
supplier name
PPG Architectural Coatings UK Ltd
Emergency telephone
+31 20 4075210
Icons in SDS
Company Information
company name
PPG Architectural Coatings UK Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
Product.Stewardship.EMEA@ppg.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H336, H411
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
1272/2008] Classification of the substance or mixture
Product definition
Mixture
Signal word
Warning
Hazard statements
Flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
Prevention
Wear protective gloves. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment. Avoid breathing vapour.
Response
Collect spillage.
Storage
Store in a well-ventilated place. Keep container tightly closed.
Disposal
Not applicable. P280, P210, P273, P261, P391, P403 + P233
Hazardous Ingredients
2-Propenoic acid, 2-methyl-, methyl ester, polymer with butyl 2-propenoate, ethenylbenzene, 1,2-propanediol mono(2-methyl-2-propenoate) and 2-propenoic acid Solvent naphtha (petroleum), light arom. Nota(s) P Reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate
Supplemental label elements
Not applicable.
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable.
Special packaging requirements
Containers to be fitted with child-resistant fastenings : Not applicable.
Tactile warning of danger
Not applicable.
2.3 Other hazards
Product meets the criteria : This mixture does not contain any substances that are assessed to be a PBT or a vPvB. for PBT or vPvB
Other hazards which do not result in classification
Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classification of the substance or mixture
Product definition : Mixture Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] Flam. Liq. 3, H226 Skin Irrit. 2, H315 Skin Sens. 1, H317 STOT SE 3, H336 Aquatic Chronic 2, H411 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended. SECTION 2: Hazards identification See Section 16 for the full text of the H statements declared above. See Section 11 for more detailed information on health effects and symptoms.
