Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
10-30
EC/CAS
1675-54-3
Name of the chemical
2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane
Concentration
1-5
EC/CAS
2530-83-8
Name of the chemical
[3-(2,3-epoxypropoxy)propyl]trimethoxy silane
Concentration
0.5-1.5
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
0.1-1
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.1-1
General Information
Version
5
Revision date
2026-06-14
Product name
PR-2936 Part A
1.2.1 Relevant identified uses
Industrial applications
Manufacturer Name
PPG Aerospace PRC-DeSoto
Icons in SDS
Company Information
company name
PPG Aerospace PRC-DeSoto
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H315, H317, H319, H341, H350, H373
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
46.6% (oral), 68.8% (dermal), 76.8% (inhalation)
Signal word
Danger
Hazard statements
Harmful if swallowed. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Suspected of causing genetic defects. May cause cancer. May cause damage to organs through prolonged or repeated exposure. (gastrointestinal tract, reproductive organs, stomach)
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Do not breathe dust. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.
Response
IF exposed or concerned Get medical advice or attention. IF SWALLOWED Call a POISON CENTER or doctor if you feel unwell. Rinse mouth. IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice or attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Sanding and grinding dusts may be harmful if inhaled. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Trimethoxysilanes are capable of forming methanol if hydrolyzed or ingested. If swallowed, methanol may be harmful or fatal or cause blindness. This product either contains formaldehyde or is capable of releasing formaldehyde above 0.5 ppm under certain conditions. Formaldehyde is a known cancer hazard, a skin sensitizer and a respiratory sensitizer. Emits toxic fumes when heated.
2.3 Other hazards
None known.
2.1 Classification of the substance or mixture
SKIN IRRITATION - Category 2 EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1 GERM CELL MUTAGENICITY - Category 2 CARCINOGENICITY - Category 1A SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 46.6% (oral), 68.8% (dermal), 76.8% (inhalation)
