Note: Ingredients listed on restricted chemical lists
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
≥1.0-≤5.0
EC/CAS
61788-32-7
Name of the chemical
Terphenyl, hydrogenated
Concentration
≥1.0-≤5.0
General Information
Version
13
Revision date
2026-03-09
Product name
PR 1422 B 1 Part B
1.2.1 Relevant identified uses
Industrial applications
Manufacturer Name
PPG Aerospace PRC-DeSoto
Icons in SDS
Company Information
company name
PPG Aerospace PRC-DeSoto
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H316, H317, H361, H373
Hazard statements
Code
Statements
H316
Causes mild skin irritation
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture SKIN IRRITATION - Category 3 SKIN SENSITIZATION - Category 1 TOXIC TO REPRODUCTION - Category 2 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 1.9% (oral), 80.7% (dermal), 93.2% (inhalation)
Signal word
Warning
Hazard statements
H316 - Causes mild skin irritation. H317 - May cause an allergic skin reaction. H361 - Suspected of damaging fertility or the unborn child. H373 - May cause damage to organs through prolonged or repeated exposure.
Prevention
P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P280 - Wear protective gloves, protective clothing and eye or face protection. P260 - Do not breathe dust. P272 - Contaminated work clothing should not be allowed out of the workplace.
Response
P308 + P313 - IF exposed or concerned: Get medical advice or attention. P302 + P352 - IF ON SKIN: Wash with plenty of water. P333 + P313 - If skin irritation or rash occurs: Get medical advice or attention. P362 + P364 - Take off contaminated clothing and wash it before reuse.
Storage
P405 - Store locked up.
Disposal
P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
Sanding and grinding dusts may be harmful if inhaled. Contains a substance that may emit formaldehyde if stored beyond its shelf life and/or during cure at curing temperatures greater than 60C ( 140F). Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. Emits toxic fumes when heated. See toxicological information (Section 11)
2.1 Classification of the substance or mixture
SKIN IRRITATION - Category 3 substance or mixture SKIN SENSITIZATION - Category 1 TOXIC TO REPRODUCTION - Category 2 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 1.9% (oral), 80.7% (dermal), 93.2% (inhalation)