Note: Ingredients listed on restricted chemical lists
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
10-30
EC/CAS
91-20-3
Name of the chemical
Naphthalene,3
Concentration
0.5-1.5
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.1-1
General Information
Version
21.01
Revision date
2026-02-04
Product name
JC11 Celloseal QH 250ml DTD900/4549
1.2.1 Relevant identified uses
Industrial applications
Manufacturer Name
PPG Aerospace PRC-DeSoto
Icons in SDS
Company Information
company name
PPG Aerospace PRC-DeSoto
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H319, H330, H334, H335, H340, H350, H361, H372
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
H315
Causes skin irritation
H317
May cause an allergic skin reaction
H319
Causes serious eye irritation
H330
Fatal if inhaled
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
H335
May cause respiratory irritation
H340
May cause genetic defects
H350
May cause cancer
H361
Suspected of damaging fertility or the unborn child
H372
Causes damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
ACUTE TOXICITY (oral) - Category 3 ACUTE TOXICITY (dermal) - Category 3 ACUTE TOXICITY (inhalation) - Category 2 SKIN IRRITATION - Category 2 EYE IRRITATION - Category 2A RESPIRATORY SENSITIZATION - Category 1 SKIN SENSITIZATION - Category 1 GERM CELL MUTAGENICITY - Category 1 CARCINOGENICITY - Category 1A TOXIC TO REPRODUCTION - Category 2 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract irritation) - Category 3 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 1 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 16.1% (oral), 52.2% (dermal), 46% (inhalation) Section 2. Hazards identification
Signal word
Danger
Hazard statements
Flammable liquid and vapor. Toxic if swallowed or in contact with skin. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Fatal if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause genetic defects. May cause cancer. Suspected of damaging fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure. (hearing organs, kidneys, respiratory tract)
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Wear respiratory protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well- ventilated area. Do not breathe vapor. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.
Response
IF exposed or concerned Get medical advice or attention. IF INHALED Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor. If experiencing respiratory symptoms: Call a POISON CENTER or doctor. IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. IF ON SKIN: Call a POISON CENTER or doctor if you feel unwell. If skin irritation or rash occurs Get medical advice or attention. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Store locked up. Store in a well-ventilated place. Keep container tightly closed.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Sanding and grinding dusts may be harmful if inhaled. This product contains crystalline elements silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. NTP,