Master Dyna-Cast Part A3

PPE

Revision date : 2018-07-25

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS08 GHS07 GHS02
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

10-25

EC/CAS

101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

10-25

EC/CAS

8052-41-3

Name of the chemical

Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy

Concentration

0.5-5.0

Listed in

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

<0.01

Listed in

General Information

Revision date

2018-07-25

Product name

Master Dyna-Cast Part A3

1.2.1 Relevant identified uses

Fast-Cast Urethane Isocyanate Resin R 1

Emergency telephone

(800) 424-9300

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

PPE

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H227, H315, H317, H320, H332, H334, H335, H372

Hazard statements

Code

Statements

H227

Combustible liquid

Section 2

SECTION 2: Hazards identification

Signal word

Danger

Hazard statements

Combustible liquid. Harmful if inhaled. May cause respiratory irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Causes damage to organs (Respiratory Tract) through prolonged or repeated exposure if inhaled. Causes skin irritation. May cause an allergic skin reaction. Causes eye irritation.

Prevention

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed when not in use. Wear protective gloves/ eye protection/ face protection. Identification continued Avoid breathing mist, vapors or spray. Do not eat, drink or smoke when using this product. Wash skin and face thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. In case of inadequate ventilation wear respiratory protection

Response

Get medical attention if you feel unwell. If on skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical attention. Wash contaminated clothing before reuse. If in eyes: Rinse continuously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. If inhaled: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Get medical attention.

Storage

Store in a well-ventilated place. Keep cool.

Disposal

Dispose of contents and container to an appropriate waste site in accordance with local and national regulations.

2.3 Other hazards

None known

2.1 Classification of the substance or mixture

Acute toxicity (Inhalation) Category 4 Specific target organ toxicity - single exposure: Category 3 (Respiratory system) Respiratory sensitization: Category 1 Specific target organ toxicity - repeated exposure: Category 1 (Respiratory Tract) Skin irritation: Category 2 Skin sensitization: Category 1 Eye irritation: Category 2B Flammable Liquid Category 3

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.