Note: Ingredients listed on restricted chemical lists
EC/CAS
2809-21-4
Name of the chemical
(1-Hydroxyethylidene-diphosphonic acid) and its salts
Concentration
N/A
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Revision date
2013-10-04
Product name
Metal Magnet
1.2.1 Relevant identified uses
Sequestering and dispersing agent for water treatment
Icons in SDS
Company Information
company name
Poolwise Ltd
Section 2
Hazard statements
This product is classified as: C, Corrosive. Hazardous according to the criteria of SWA. Dangerous according to the Australian Dangerous Goods (ADG) Code. R34, R37. Causes burns. Irritating to respiratory system
Precautionary statements
S20, S23, S26, S28, S46, S24/25, S36/39. When using, do not eat or drink. Do not breathe vapours or spray mists. In case of contact with eyes, rinse immediately with plenty of water and contact a doctor or Poisons Information Centre. After contact with skin, wash immediately with plenty of soap and water. If swallowed, contact a doctor or Poisons Information Centre immediately and show this MSDS or label. Avoid contact with skin and eyes. Wear suitable protective clothing and eye/face protection.
SUSMP Classification
None allocated
ADG classification
Class 8 Corrosive Substances
UN Number
3265, CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S Emergency Overview Physical Description & Colour: Clear colourless to pale yellow liquid. Odour: No odour.
Health hazards
causes burns, respiratory tract irritant
Potential health effects
Inhalation: Short Term Exposure: Available data indicates that this product is an inhalation irritant. Symptoms may include headache, irritation of nose and throat and increased secretion of mucous in the nose and throat. Other symptoms may also become evident, but they should disappear after exposure has ceased. If liquid enters nasal passages, it will cause pain and burn nasal membranes. Patients with inhalation burns may develop acute pulmonary oedema. Long Term Exposure: No data for health effects associated with long term inhalation. Skin Contact: Short Term Exposure: Available data indicates that this product is corrosive to the skin. Capable of causing moderate to severe burns with ulceration. Can penetrate to deeper layers of skin, resulting in third degree burns. Corrosion will continue until product is removed or neutralised. Severity depends on concentration and duration of exposure. Burns may not be immediately painful; the onset of pain may be minutes to hours. Long Term Exposure: No data for health effects associated with long term skin exposure. Eye Contact: Short Term Exposure: This product is corrosive to eyes. It will cause severe pain, and corrosion of the eye and surrounding facial tissues. Unless exposure is quickly treated, permanent blindness and facial scarring is likely. Long Term Exposure: No data for health effects associated with long term eye exposure. Ingestion: Short Term Exposure: Significant oral exposure is considered to be unlikely. However, this product is corrosive to the gastrointestinal tract. Capable of causing moderate to severe burns with ulceration. Can penetrate to deeper layers of skin, resulting in third degree burns. Corrosion will continue until product is removed or neutralised. Severity depends on concentration and duration of exposure. Long Term Exposure: No data for health effects associated with long term ingestion. Carcinogen Status: SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC.