Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
30-60
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
30-60
General Information
Version
rev 2 supersedes 1
Revision date
2017-08-09
Product name
FST Foam SealantBurst Pack FST-BP (Part A)
1.2.1 Relevant identified uses
Sealant, duct block; two-part material List of advices against
Emergency telephone
1-651-430-2270, +31 (0)10 2330578, 1-800-535-5053, +1-352-323-3500, +31(0)30 274 8888
Icons in SDS
Company Information
company name
Polywater Europe BV
e-mail address of the competent person responsible for the Safety Data Sheet
sds@polywater.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
H317
May cause an allergic skin reaction
H319
Causes serious eye irritation
H332
Harmful if inhaled
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
H335
May cause respiratory irritation
H351
Suspected of causing cancer
H373
May cause damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
OSHA Classification of the substance or mixture
Contains
Polymeric diphenylmethane diisocyanate; 4,4’-Diphenylmethane diisocyanate (MDI)
Signal word
Danger
Hazard statements
H332 Harmful if inhaled. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H351 Suspected of causing cancer. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated inhalative exposure.
Supplemental label elements
EUH304 Contains isocyanates. May produce an allergic reaction.
Precautionary statements
P260 Do not breathe dust, vapor, or spray. P284 In case of inadequate ventilation wear respiratory protection. P280 Wear protective gloves, protective clothing and eye protection. P304 + P340 IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if P338 present and easy to do. Continue rinsing. P308 + P313 Notes IF exposed or concerned: Get medical advice. 4,4'-methylenediphenyl diisocyanate (MDI) has not been designated as a carcinogen
2.3 Other hazards
Information according to XVII. 56 REACH Persons already sensitized to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. Pregnant women should absolutely avoid inhalation and skin contact.
2.1 Classification of the substance or mixture
Classification according to EU Regulation (EC) No 1272/2008 and Australia WHS Regulation (2011). Acute Toxicity, Cat 4 Skin Irritation, Cat 2; H315 Eye Irritation, Cat 2; H319 Respiratory Sensitization, Cat 1; H334 Skin Sensitization, Cat 1; H317 Carcinogenicity, Cat 2; H351 Target Organ Toxicity (single exposure), Cat 3; H335 Target Organ Toxicity (repeated exposure), Cat 2; H373