Base Sealant PMT (Part A)

Polywater Europe BV

Revision date : 2017-08-09

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS08 GHS07
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

50-60

EC/CAS

202-966-0/101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

40-50

General Information

Version

rev 8 supersedes 7

Revision date

2017-08-09

Product name

Base Sealant PMT (Part A)

1.2.1 Relevant identified uses

Sealant, polymer matrix barrier; two-part material List of advices against

Emergency telephone

+31 (0)10 2330578, 1-651-430-2270, 1-800-535-5053, +1-352-323-3500, +31(0)30 274 8888

Icons in SDS

GHS07 GHS08

Company Information

company name

Polywater Europe BV

e-mail address of the competent person responsible for the Safety Data Sheet

sds@polywater.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H315, H317, H319, H332, H334, H335, H351, H373

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

SECTION 2: Hazards identification

OSHA Classification of the substance or mixture

Contains

Polymeric diphenylmethane diisocyanate; 4,4’-Diphenylmethane diisocyanate (MDI)

Signal word

Danger

Hazard statements

H332 Harmful if inhaled. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H351 Suspected of causing cancer. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated inhalative exposure.

Supplemental label elements

EUH304 Contains isocyanates. May produce an allergic reaction.

Precautionary statements

P260 Do not breathe dust, vapor, or spray. P284 In case of inadequate ventilation wear respiratory protection. P280 Wear protective gloves, protective clothing and eye protection. P304 + P340 IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if P338 present and easy to do. Continue rinsing. P308 + P313 Notes IF exposed or concerned: Get medical advice. 4,4'-methylenediphenyl diisocyanate (MDI) has not been designated as a carcinogen

2.3 Other hazards

Information according to XVII. 56 REACH Persons already sensitized to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. Pregnant women should absolutely avoid inhalation and skin contact.

2.1 Classification of the substance or mixture

Classification according to EU Regulation (EC) No 1272/2008 and Australia WHS Regulation (2011). Acute Toxicity, Cat 4 Skin Irritation, Cat 2; H315 Eye Irritation, Cat 2; H319 Respiratory Sensitization, Cat 1; H334, H335 Skin Sensitization, Cat 1; H317 Carcinogenicity, Cat 2; H351 Target Organ Toxicity (single exposure), Cat 3 Target Organ Toxicity (repeated exposure), Cat 2; H373

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.