Note: Ingredients listed on restricted chemical lists
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
N/A
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
General Information
Product name
Putty Flex Bumper Glaze
1.2.1 Relevant identified uses
Used for spot filling and skim coating over repair areas on flexible bumpers and plastic parts
Icons in SDS
Company Information
company name
Polyvance
e-mail address of the competent person responsible for the Safety Data Sheet
info@polyvance.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H240, H316, H320
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Appearance: Opaque, high viscosity, pourable liquid Odor: Acrid
Hazard statements
WARNING! Flammable liquid and vapor. Heating may cause an explosion. Causes mild skin irritation. Causes eye irritation. Codes for This Product Type Code Text Physical H226 Flammable liquid and vapor Health H316 Causes mild skin irritation Health H320 Causes eye irritation Physical H240 Heating may cause an explosion Type Code Text General P102 Keep out of reach of children General P102 General P103 Read label before use
Signal word
Hazard Flammable Liquid
Physical hazards
Pictogram GHS Health Hazard Pictogram(s)
Environmental hazards
Pictogram Flammable Irritant
Health hazards
Not Applicable
Precautionary statements
Keep out of reach of children. Read label before use. Keep away from heat/sparks/open flames/hot surfaces - No smoking. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN: Wash with soap and water. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Codes for This Product
Prevention
P210 Keep away from heat/sparks/open flames/hot surfaces - No smoking
Response
P301+330+33 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting P302+352 IF ON SKIN: Wash with soap and water P304+340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
Potential health effects
Eye Contact: May cause irritation. Liquid splashes may result in more serious injuries. Skin Contact: Can dry and defat skin with resultant irritation and possible dermatitis. Skin Absorption: Styrene may be absorbed through the skin in toxic amounts. May cause allergic reactions and systematic toxicity. Inhalation: Dizziness, headaches, breathing difficulties, and possible narcosis. Prolonged exposure to high concentrations may be fatal. Ingestion: May cause gastrointestinal disturbances, pain, and discomfort.
