Poly-Optic 1410 Clear Casting Resin Part A

Polytek Development Corp

Revision date : 2018-05-29

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS06 GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

5124-30-1

Name of the chemical

4,4'-methylenedicyclohexyl diisocyanate

Concentration

N/A

General Information

Revision date

2018-05-29

Product name

Poly-Optic 1410 Clear Casting Resin Part A

CAS No.

5124-30-1

1.2.1 Relevant identified uses

Component for Polyurethane Clear Casting Resin

Manufacturer Name

Polytek Development Corp

Emergency telephone

800-424-9300 or

Icons in SDS

Company Information

company name

Polytek Development Corp

e-mail address of the competent person responsible for the Safety Data Sheet

sds@polytek.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H315, H317, H319, H331, H334, H335

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

2.1 Classification of the substance or mixture

Acute Toxicity - Inhalation Category 3 Skin Irritation Category 2 Eye Irritation Category 2A Respiratory Sensitization Category 1 Skin Sensitization Category 1 Specific Target Organ Toxicity Single Exposure Category 3

2.2 Label elements

Danger

Hazard statements

H331 Toxic if inhaled. H315 Causes skin irritation. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation.

Precautionary statements

P261 Avoid breathing mist, vapors, or spray. P264 Wash thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves, protective clothing, eye protection, and face protection. P285 In case of inadequate ventilation, wear respiratory protection. P302+352 IF ON SKIN: Wash with plenty of soap and water. P304+340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+313 If skin irritation or rash occurs: Get medical advice or attention. P362+364 Take off contaminated clothing and wash before reuse. P342+311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor. P403+233 Store in a well-ventilated place. Keep container tightly closed. P501 Dispose of contents and container in accordance with local, regional and national regulations.

Additional information

Individuals sensitized to isocyanates should discontinue use. Long-term overexposure to isocyanates may cause lung damage. This is one part of a two-part system. Read and understand the hazard information on part B before using.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.