Note: Ingredients listed on restricted chemical lists
EC/CAS
68479-98-1
Name of the chemical
Diethylmethylbenzenediamine
Concentration
10-15%
General Information
Revision date
2013-12-06
Product name
Poly 74-40 Liquid Rubber Part B
CAS No.
68479-98-1
1.2.1 Relevant identified uses
Component for Polyurethane Mold Rubber
Manufacturer Name
Polytek Development Corp
Emergency telephone
800-424-9300, +1 703-527-3887
Icons in SDS
Company Information
company name
Polytek Development Corp
e-mail address of the competent person responsible for the Safety Data Sheet
sds@polytek.com
GHS Information
Signal word
Warning!
Section 2
SECTION 2: Hazards identification
GHS Classification positive pressure, self-contained breathing apparatus and full-body
2.1 Classification of the substance or mixture
Eye Irritation Category 2A Specific Target Organ Toxicity - Repeated Exposure Category 2 Aquatic Chronic Toxicity Category 2
2.2 Label elements
Warning! Procedures: Remove all ignition sources. Clear non-emergency personnel from the area. Wear appropriate protective clothing to prevent eye and skin contact and avoid breathing vapors. Caution – spill area may be slippery.
Contains
Diethyltoluenediamine Methods and Materials for Containment and Cleanup: Cover with an
Hazard statements
H319 Causes serious eye irritation. H373 May cause damage to pancreas through prolonged or repeated inert absorbent material and collect into an appropriate container for disposal. Avoid releases to the environment. Report spills and releases as required to appropriate authorities. exposure. H411 Toxic to aquatic life with long-lasting effects. 7. Handling and Storage
Precautionary statements
P260 Do not breathe vapors. P264 Wash thoroughly after handling. P273 Avoid release to the environment. P314 Get medical advice if you feel unwell. P280 Wear eye and face protection. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists Get medical advice or attention. P391 Collect spillage. P501 Dispose of contents and container to licensed, permitted incinerator, or other thermal destruction device in accordance with local and national regulations Safe Handling: Use with adequate ventilation. Avoid contact with the eyes, skin and clothing. Wash thoroughly after handling. Do not eat, drink or smoke in the work area. Keep container closed when not in use. Safe Storage: Store indoors at temperatures below 120°F (49°C). Store in original containers. Avoid getting moisture into containers. Keep containers tightly closed. 8. Exposure Controls/Personal Protection Occupational Exposure Limits: None established. Ventilation: Use with adequate general or local exhaust ventilation to minimize exposure levels. Respiratory Protection: If needed, an approved respirator with organic vapor cartridges may be used. Respirator selection and use should be based on contaminant type, form and concentration. For higher
Additional information
None known. This is one part of a two-part system. Read and understand the hazard information on Part A before using exposures or in an emergency, use a supplied-air respirator. Skin Protection: Wear impervious gloves, such as butyl rubber or nitrile rubber. Eye Protection: Wear chemical safety goggles.