Note: Ingredients listed on restricted chemical lists
EC/CAS
68479-98-1
Name of the chemical
Diethylmethylbenzenediamine
Concentration
N/A
General Information
Revision date
2022-02-10
Product name
Poly 74-20 Liquid Rubber Part B
CAS No.
68479-98-1
1.2.1 Relevant identified uses
Component for Polyurethane Mold Rubber. For Industrial/Professional use only
Manufacturer Name
Polytek Development Corp
Emergency telephone
800-424-9300, +1 703-527-3887
Icons in SDS
Company Information
company name
Polytek Development Corp
e-mail address of the competent person responsible for the Safety Data Sheet
sds@polytek.com
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
GHS Classification Personal Precautions, Protective Equipment and Emergency
2.1 Classification of the substance or mixture
Skin Irritation – Category 2 Specific Target Organ Toxicity – Repeated Exposure Category 2
2.2 Label elements
Warning may be slippery. Methods and Materials for Containment and Cleanup: Cover with an inert absorbent material and collect into an appropriate container for disposal. Avoid releases to the environment. Report spills and releases
Hazard statements
H315 Causes skin irritation. H373 May cause damage to pancreas through prolonged or repeated as required to appropriate authorities. Handling and Storage 7. exposure. Safe Handling: Use with adequate ventilation. Avoid breathing fumes,
Precautionary statements
P260 Do not breathe fumes, vapors, mists or sprays. P264 Wash thoroughly after handling. P280 Wear protective gloves. P302+P352 IF ON SKIN Wash with plenty of soap and water. P319 Get medical help if you feel unwell. P332+P317 If skin irritation occurs Get medical help. P362+P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents and container in accordance with local regional and national regulations.
Additional information
This is one part of a two-part system. Read and understand the hazard information on Part A before using vapors, mists or sprays. Avoid contact with the eyes, skin and clothing. Wash thoroughly after handling. Do not eat, drink or smoke in the work area. Keep container closed when not in use. Safe Storage: Store indoors at temperatures below 120°F (49°C). Store in original containers. Avoid getting moisture into containers. Keep containers tightly closed. 8. Exposure Controls/Personal Protection Occupational Exposure Limits: None Established Ventilation: Use with adequate general or local exhaust ventilation to minimize exposure levels. Respiratory Protection: If needed, an approved respirator with organic vapor cartridges may be used. Respirator selection and use should be
