Note: Ingredients listed on restricted chemical lists
EC/CAS
75-37-6
Name of the chemical
1,1-Difluoroethane
Concentration
35-55
General Information
Revision date
2014-03-07
Product name
Pol-Ease 2300 Release Agent
1.2.1 Relevant identified uses
Aerosol release agent for mold making and casting. For Industrial/Professional use only
Manufacturer Name
Polytek Development Corp
Emergency telephone
800-424-9300, +1 (703) 527-3887
Icons in SDS
Company Information
company name
Polytek Development Corp
e-mail address of the competent person responsible for the Safety Data Sheet
sds@polytek.com
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Flammable Aerosol Category 2 Gases Under Pressure – Liquefied gas
2.2 Label elements
Warning Personal Precautions, Protective Equipment and Emergency Procedures: Remove ignition sources. Clear non-emergency personnel from the area. Wear appropriate protective clothing to avoid eye and skin contact and avoid breathing vapor/aerosol. Methods and Materials for Containment and Cleanup: Cover with an
Hazard statements
H223 Flammable aerosol. H280 Contains gas under pressure; may explode if heated inert absorbent material and collect into an appropriate container for disposal. 7. Handling and Storage
Precautionary statements
P210 Keep away from heat, sparks, open flames and hot surfaces. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Pressurized container Do not pierce or burn, even after reuse. P377 Leaking gas fire Do not extinguish unless leak can be stopped safely. P381 Eliminate all ignition sources if safe to do so. P410+403+412 Protect from sunlight. Store in a well-ventilated place. Do not expose to temperatures exceeding 50°C/122°F.
Additional information
Avoid breathing aerosol spray. Use in a well-ventilated area and wear a dust mask Keep away from heat, sparks, and open flames. Avoid Safe Handling: breathing vapors, aerosols and mists. Use with adequate ventilation. Avoid contact with the eyes, skin and clothing. Wash thoroughly after handling. Do not eat, drink or smoke in the work area. Safe Storage: Store in a cool, dry area in a well-ventilated area away from ignition sources. 8. Exposure Controls/Personal Protection Occupational Exposure Limits: Manufacturer recommends exposure limit of 1000 ppm (TWA). For 1,1-Difluoroethane:1000 ppm AIHA WEEL TWA. Ventilation: Use with adequate general or local exhaust ventilation to maintain exposure levels below the occupational exposure limits.