General Information
Revision date
2015-01-28
Product name
PlatSil 73-29 Silicone Rubber Part A
CAS No.
70900-21-9
1.2.1 Relevant identified uses
Component for silicone mold rubber. For Industrial/Professional use only
Manufacturer Name
Polytek Development Corp
Emergency telephone
800-424-9300, +1 (703) 527-3887
Icons in SDS
Company Information
company name
Polytek Development Corp
e-mail address of the competent person responsible for the Safety Data Sheet
sds@polytek.com
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
OSHA from the area. Caution: spill area may be slippery. Avoid eye and skin
2.1 Classification of the substance or mixture
Eye Irritation Category 2A
2.2 Label elements
Warning and prevent/minimize release to the environment. Collect and containerize material for disposal. 7. Handling and Storage Safe Handling: Avoid contact with eyes, skin (especially mucous membranes) and clothing. Use in a ventilated area. Wash hands after Contains hydride-terminated polydimethylsiloxane. handling. Safe Storage: Store indoors at temperatures between 60 and 95°F. Store
Hazard statements
H315 Causes skin irritation in original containers. Avoid getting moisture into containers. Keep containers tightly closed. H319 Causes serious eye irritation. Precautionary Phrases P264 Wash hands and contacted skin thoroughly after handling. P280 Wear protective gloves and eye protection. P302+P352 IF ON SKIN Wash with plenty of soap and water. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P332+P313 If skin irritation occurs Get medical advice. P337+P313 If eye irritation persists Get medical advice. P362 Take off contaminated clothing and wash before reuse 8. Exposure Controls/Personal Protection
Additional information
None 45A and 73-55A are green; 73-60A is blue) Odor: Mild Odor Threshold: No data available
